View Single Post
      03-28-2019, 10:06 AM   #32
Djdnav
First Lieutenant
227
Rep
369
Posts

Drives: F80 M3
Join Date: Jul 2018
Location: Central FL

iTrader: (6)

Quote:
Originally Posted by Chris@VargasTurboTech View Post
hey guys. Of course, our bolts are longer to compensate for the capture. Those button heads in the photos were taken prob 2 years ago when we first released these. Those bolts were never shipped. We have sent, and will always send grade 12.9 socket caps. Our bolts are 12mm longer than factory to not only make up for the width of the capture but also use as much of the available thread as possible in the hub. So to hit all points. VTT bolts 28mm of thread, 12.9 grade. Factory 16mm of thread 8.8 or 10.9 grade(not sure which). Our bolts are not only longer, but also stronger (see attached chart). This is not our first rodeo guys. We have all our bases covered...
To be fair, I don’t think anyone doubted the quality of what you guys put out, just making objective comparison. I was more than satisfied with the transaction with VTT.
__________________
///M3
Appreciate 3