Quote:
Originally Posted by jfritz27
OK, super-nerdy question here: If one wishes to flush the stock brake system, and ONLY use a maximum of 1 L of fresh fluid, and be anally quantitative in the process, how much volume should be flushed out at each corner?! Go!.... I realize it's "until it comes out looking fresh", but still....
Something like 200 mL per corner, maybe a bit more for rears & less for fronts, leaving a little to top off reservoir?
|
IL is plenty sufficient to flush the system. The colour of the fluid remains the best indication. You need to flush a fair bit more on the first claiper you bleed (best to start the farthest away from the master cylinder) because you need flush out what is left in the master cylinder tank. Don't forget, there are two sides to flush on each of the front calipers.