Quote:
Originally Posted by TOXIC.M4
many thanks for reply. will try to describe reason, the car has 12k miles, I owner, so car engine was tested on auction if it runs or not and due to car was w/o thermostat during start all oil was thrown out, as I assume engine was running few seconds but enough for doubts, after purchase when I drain remaining oil there was about 2 ltr of old oil.... after oil and filter replacement car was running 50 km or less. I open engine cover due to valvetronic motor has fault. we found that intake camshaft needs replacement, however oil filter is clean w/o any metal particles. that's why I want to know condition of rod bearings.
|
Not that I’m the guy to ask, but I feel like I’d want to tear the engine all the way down in this case.