|
Hey guys, I had my car tuned on BM3. Initially stage 1, then stage 2 with downpipes. We did countless street logs and revisions, and everything was fine on the street. However both times I get to the track (Stage 1 and Stage 2 flash), the car immediately goes into drivetrain malfunction within the first 1-2 laps in the first session cutting boost completely and limiting RPM to about 4K, just enough to limp it on track. I turn the car off, clear any codes it has, and the car will continue to boost, however it will progressively pull a noticeable amount of power as the car gets hotter after each lap and eventually begin to cut power towards the end of straights. I'm curious if anyone had a similar problem. Any input is appreciated.
|