Quote:
Originally Posted by Alan l.
^^ Appreciate you taking time to inform everyone about your experiences with these coilovers.
|
Of course. Trying to contribute in a meaningful way when I can.
On the flip side, I just thought of something. As is, my car is sitting pretty low in the rear. Bilstein specs the rear drop as being 5-25mm lower than stock. My MS springs were a 17mm rear drop, and the shop which installed the B16 basically set up the rear at the same height or slightly lower. Personally, I prefer a higher rear ride height to begin with, so I'm going to try to go to up 10mm in the rear and report back with results. These are progressive rate springs, so I'm wondering if decompressing them a bit will sort out the rear a little better. It was my intention to go max height from the beginning anyways.
Hopefully I can get around to it this week/weekend and have some good news