Quote:
Originally Posted by weytie
Maybe that is the reason why PB brakes is not offering the big 8 pot calipers on 380 mm rotors.
They only offer these calipers for 405mm discs. And there the pads would not be so close near the edge of the disc.
|
I did consider that perhaps they had sent the wrong adapters. With the front 405mm rotors the calipers would be too close though. I have maybe 8mm of clearance from the caliper to the rotor. Adding 12.5mm of rotor would be 4+mm into the caliper. The rear need to be moved a couple of mm as well I think.