Quote:
Originally Posted by jpy1980
I had this issue and it could be a faulty wire to your B16 suspension and/or the accelerometer sensor on your shock. It's probably not a permanent error, but a soft error that when triggered will come on. Hopefully it's as simple as replacing the sensor and/or wire, worst case, change out the shock.
Here's a long thread on the issue: https://f80.bimmerpost.com/forums/sh....php?t=1092996
I just decided to go with a static coilover system and coded out EDC.
Good luck!
|
Hey thanks for chiming in... I did read your previous post. You were able to pull error codes it appears. On your screenshots, what software/device were you using to pull the codes? I'm assuming if I had the same ones, BM3 would find them, but I'm not sure. Without additional diagnostic info like those codes it's kind of a shot in the dark, with a lot of potential for $$$ in shop hours to diagnose. At least if I have the same error as you pointing to a particular side I could get replacement cables as the first step, that would streamline things a bit. Thanks