View Single Post
      02-11-2020, 02:42 PM   #4
Corsa Motorsport
Private
Corsa Motorsport's Avatar
169
Rep
71
Posts

Drives: BMW M4
Join Date: Feb 2020
Location: Huntington Beach

iTrader: (0)

Aero & Chassis Mounting

Next on the list was install our aero and figure out our chassis mounting solution for both the wing and splitter. The trunk was slotted and we custom cut aluminum stands to the appropriate height, which places the wing blade at just about roof line. With the wing chassis mounts eliminating easy access to the trunk, we had to get creative with the rear JRZ reservoir placement. Two new holes, a bracket fabbed up and problem solved.

Name:  WhatsApp Image 2020-02-11 at 2.23.26 PM.jpeg
Views: 7231
Size:  201.3 KB

Name:  WhatsApp Image 2020-02-11 at 2.23.27 PM.jpeg
Views: 7225
Size:  207.6 KB

Name:  WhatsApp Image 2020-02-11 at 2.23.27 PM (1).jpeg
Views: 7195
Size:  190.4 KB

Name:  WhatsApp Image 2020-02-11 at 2.23.28 PM.jpeg
Views: 7177
Size:  199.1 KB

Name:  WhatsApp Image 2020-02-11 at 2.23.29 PM.jpeg
Views: 7144
Size:  162.9 KB

Name:  WhatsApp Image 2020-02-11 at 2.23.29 PM (1).jpeg
Views: 7145
Size:  147.2 KB



Alignment at Chewerks

Time to have the alignment dialed in. Had the car towed over to Rob at Chewerks and have the car properly aligned. I have nothing but good things to say about Rob from S2Ks to M cars. If you are in SoCal, I would highly recommend him.

Front Camber: -3.5 deg
Front Caster: 7.8 deg
Front Toe: -0.06 deg
Rear Camber: -2.8 deg
Rear Toe: 0.06 deg


Name:  alignment1.jpg
Views: 7060
Size:  66.0 KB
Name:  alignment4.jpg
Views: 7023
Size:  85.3 KB
Name:  alignment2.jpg
Views: 7018
Size:  112.2 KB
Name:  alignment3.jpg
Views: 6999
Size:  61.0 KB

Last edited by Corsa Motorsport; 02-11-2020 at 07:28 PM..
jacobe92549.00
jmg9390.50
Miko M6318.50