[Corsa Motorsport]

Aero & Chassis Mounting

Next on the list was install our aero and figure out our chassis mounting solution for both the wing and splitter. The trunk was slotted and we custom cut aluminum stands to the appropriate height, which places the wing blade at just about roof line. With the wing chassis mounts eliminating easy access to the trunk, we had to get creative with the rear JRZ reservoir placement. Two new holes, a bracket fabbed up and problem solved.















Alignment at Chewerks

Time to have the alignment dialed in. Had the car towed over to Rob at Chewerks and have the car properly aligned. I have nothing but good things to say about Rob from S2Ks to M cars. If you are in SoCal, I would highly recommend him.

Front Camber: -3.5 deg
Front Caster: 7.8 deg
Front Toe: -0.06 deg
Rear Camber: -2.8 deg
Rear Toe: 0.06 deg