|
You need to code
SM (6d) MODULE (Driver seat position)
3000 EINAUSSTIEGSHILFE set to: Modus_FA_SLV if you want the seat to move backward when exiting the car
3012 EAH_VERFAHRWEG_SLV_PHYS werte = 00, 28 (default 00, 3C)
3012 EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS werte = 00, 3C (default 00, 64)
The werte "64" = 100mm and “28” = 40 mm of retraction, lower the number from 64 or convert the hex value entry to decrease the retraction.
|