And in case anyone wondering how to diy this one, its not too bad.
You pop the large center dash/vent trim straight out using just your fingers
Remove 4 T20 screws at each corner of the trim
Unplug 1 wiring harness connection
Remove Climate control and radio from trim with flat blade screwdriver
Here is the tricky part:
The outer matte black trim is plastic welded to the inner gloss trim, and requires breaking the 6 welds from behind the trim. My tools of choice were a soldering iron with a flat edged attachment to melt the welds and 2 plastic pry tools. If you decide to tackle this let me know, and I will show in greater detail.
|