Quote:
Originally Posted by agentrnge
Can someone confirm that we can just do a normal bleed procedure on these cars. I recall suggestions that we needed to use INPA or something to cycle the ABS/DSC units, but then most posts don't mention that at all. Planning on doing the first flush on this car in the next ~1-2 months. just ticked past the 3 year mark. Only at ~20k miles, and no track sessions though, so not in any rush.
|
Technically to do it properly you need to use the procedure you mention above (INPA) to cycle/flush the ABS system. A traditional bleed (either manual or power bleeder) will not get all the air out if there is air in the ABS. I bleed my own brakes on my track car, but for the daily I would have the dealer do it with the proper ABS cycle.