Quote:
Originally Posted by Expert@ApexRaceParts
helothere,
Unfortunately the 18x11 ET44 will not fit on the front of the F80. This is also the case with the 18x10.5 ET22 fitment.
Due to the design of the F8x chassis, there will not be enough clearance up front for any wheel larger than the 18x10 ET25 units we offer. If you are looking for a square fitment, we would recommend the following:
18" Squared:
F/R: 18x10 ET25 - 275/35-18
If you are interested in a staggered fitment then we would recommend the following:
18" Staggered:
Front: 18x10 ET25 - 275/35-18
Rear: 18x11 ET44 - 305-35-18 (295/35-18 can also work)
I hope this was helpful! 
- Max |
Max,
Thanks for the reply.
I know common setup is what you are suggesting.
However from your manufacturer website where it shows the fitment possibilities,
as long as I have good bit of camber up front with possible spacer attached I can even fit 18x11 +44 as well.
If that is the case, wouldn't 18x10.5 +25 with small spacer also work? I already do have lot of camber.