Quote:
Originally Posted by 2HIGH~PSI
^^ To further answer my own question as I did it yesterday and was quite simple.
There are only two clips on the back side of the fender black grill. One at top and one at bottom, After masking the area, you can just use the pry tool to pop the two back clips, then slightly pull straight back, not out away from the car as there are little nibs holding the front in place.
I did the side vents yesterday and I broke both chrome pieces trying to get them out as they were super tight against the black fender grill and wouldnt clip out, even reaching in the fender with my hand.
|
Just finished mine and ended up bending the original off and breaking it. Luckily they come off with ease this way but ideally I'd like to not have broke the originals. The tips above were all super helpful, wasn't expecting this to be more difficult than the front grilles, but worth the effort.