04-29-2021, 12:04 PM | #1 |
Lieutenant
247
Rep 514
Posts |
Engine oil level sensor stops measuring at 16%
IDrive allows engine oil measurement; however after selection the engine oil level sensor stops measuring at 16%, while car is in neutral, on level ground and with the engine at normal operating temperatures. Tried a forum search, no conclusive info.
iDrive states the engine oil level is “Ok.” No tune, attempted pre and post 30min+ drive, and then allowed again for cooling period, no joy. Suspect defective oil level sensor. Any thoughts? |
04-29-2021, 12:56 PM | #2 |
Lieutenant
876
Rep 433
Posts |
Probably level sensor but try this: Disconnect battery for 30min and reconnect, clear any codes from battery reconnection...then go for a drive and check.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|