VRSF cold-side charge pipe

[Djdnav]

For anyone in the market for a cold-side charge pipe, VRSF is now producing them. I put up an install thread in the DIY/Coding section in case anyone is interested and/or scared away from the previously lacking information about how to install it. It’s a solid piece (like all their parts) and the install isn’t as bad as you might think.

https://f80.bimmerpost.com/forums/sh...2#post23847602

[Tiago@VRSF]

Originally Posted by Djdnav

For anyone in the market for a cold-side charge pipe, VRSF is now producing them. I put up an install thread in the DIY/Coding section in case anyone is interested and/or scared away from the previously lacking information about how to install it.

Thanks again for the review! These are expected to arrive/ship in 3 weeks!

Here's a link to the DIY: https://f80.bimmerpost.com/forums/sh...2#post23847602

[M3anPower]

Originally Posted by Tiago@VRSF

Thanks again for the review! These are expected to arrive/ship in 3 weeks!

Here's a link to the DIY: https://f80.bimmerpost.com/forums/sh...2#post23847602

Nice to see another option, why they are not stock/BMS style instead of having two angled pipes welded?

[Djdnav]

Originally Posted by ///M1990

Nice to see another option, why they are not stock/BMS style instead of having two angled pipes welded?

I haven’t seen the inside of a BMS pipe, so I don’t know how it’s made. If you look at the bend in the stock pipe, there is a diameter reduction. The VRSF piece is more of a constant radius. I suppose they thought better of leaving the joint angle instead of grinding it down and welding over it.

[LongBeachDinanFan]

This looks awfully restrictive compared to the BMS one?

[prodigymb]

Originally Posted by LongBeachDinanFan

This looks awfully restrictive compared to the BMS one?

yeah I gotta say the BMS one looks much nicer.

[M3anPower]

Originally Posted by LongBeachDinanFan

This looks awfully restrictive compared to the BMS one?

That's exactly what I was trying to say on my previous post.

[mike@x-ph.com]

Originally Posted by Djdnav

For anyone in the market for a cold-side charge pipe, VRSF is now producing them. I put up an install thread in the DIY/Coding section in case anyone is interested and/or scared away from the previously lacking information about how to install it. It’s a solid piece (like all their parts) and the install isn’t as bad as you might think.