Coding Software

[shawnsheridan]

Originally Posted by 2kaccordocoupe

shawnsheridan Hi Shawn, I have an F98 on order that should be here in the next week or two. I'm replacing an F82. Can you please send me the latest coding files? Thanks!

PM sent.

[bmwmilos]

Hi Shawn. Could I also get a link for coding sw. I have an F82 M4 pre LCI and I will install black line rear lights so i need to code REM for new lights. Thanks.

[shawnsheridan]

Originally Posted by bmwmilos

Hi Shawn. Could I also get a link for coding sw. I have an F82 M4 pre LCI and I will install black line rear lights so i need to code REM for new lights. Thanks.

PM sent.

[TB///M3]

Shawn, pls pm me coding for 16 F80, just got back from the dealer and they updated my car and i lost everything.

[blockdoc]

Hey Shawn. My Esys stopped working. Im gonna have to reinstall.. Can I have the latest versions again? Thanks a million

2015 F82
Brian

[clay10]

Request!

[shawnsheridan]

Originally Posted by TB///M3

Shawn, pls pm me coding for 16 F80, just got back from the dealer and they updated my car and i lost everything.

Originally Posted by blockdoc

Hey Shawn. My Esys stopped working. Im gonna have to reinstall.. Can I have the latest versions again? Thanks a million

2015 F82
Brian

Originally Posted by clay10

Request!

PM's sent.

[Liquid2.0T]

Hey Shawn,

I have an issue with the FEM_Body ECU and I'm getting a "cafd_ffffffff-255_255_255" error.

However when I try to do the following steps:
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

I can't because I have the "Detect CAF for SWE" option in Esys grayed out for some reason. I'm running Esys 3.27.1 and psdz lite v4.19.40. Any idea why I don't have that "Detect CAF for SWE" option available?

Thanks!

[shawnsheridan]

Originally Posted by Liquid2.0T

Hey Shawn,

I have an issue with the FEM_Body ECU and I'm getting a "cafd_ffffffff-255_255_255" error.

However when I try to do the following steps:
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.

I can't because I have the "Detect CAF for SWE" option in Esys grayed out for some reason. I'm running Esys 3.27.1 and psdz lite v4.19.40. Any idea why I don't have that "Detect CAF for SWE" option available?

Thanks!

Inject CAFD and Encode using E-Sys 3.3x.

[Liquid2.0T]

Originally Posted by shawnsheridan

Inject CAFD and Encode using E-Sys 3.3x.

Thanks, do I need the full psdz, or can I do this with the lite version?

[shawnsheridan]

Originally Posted by Liquid2.0T

Thanks, do I need the full psdz, or can I do this with the lite version?

Just Lite is fine.

[Liquid2.0T]

yaaaaaaaassss!!

Thanks buddy! It worked.

[shawnsheridan]

Originally Posted by Liquid2.0T

yaaaaaaaassss!!

Thanks buddy! It worked.

[AdvRider]

Shawn, pls pm me coding for 15 F82

[shawnsheridan]

Originally Posted by AdvRider

Shawn, pls pm me coding for 15 F82

PM sent.

[Spun Crankhub]

Hey shawnsheridan can I get some files from you for my 15 M4? Thanks in advance!

[shawnsheridan]

Originally Posted by TacoChris

Hey shawnsheridan can I get some files from you for my 15 M4? Thanks in advance!

PM sent.

[Spun Crankhub]

Originally Posted by shawnsheridan

PM sent.

You da man, thanks so much!

[laheqt]

Hey shawnsheridan, I know I might not be in the correct place currently but I'm new so hopefully you'll still help me.

I want to code my 2014 F31 so could you please send me the necessary files/software download links?

I'm pretty new to this (never done this before) so got a question from watching a video. When you connect with E-sys you need to choose the correct chassis version without the "DIRECT" in the end. For F30 you choose F020 etc. What should I choose for F31? Still the F020?
2ndly, I've been through tons of forums, videos etc and I noticed in a thread where Almaretto mentioned that people are not using cheat sheets anymore, rather an XML or something. What did he mean by that?

Thanks a ton!

[shawnsheridan]

Originally Posted by laheqt

Hey shawnsheridan, I know I might not be in the correct place currently but I'm new so hopefully you'll still help me.

I want to code my 2014 F31 so could you please send me the necessary files/software download links?

I'm pretty new to this (never done this before) so got a question from watching a video. When you connect with E-sys you need to choose the correct chassis version without the "DIRECT" in the end. For F30 you choose F020 etc. What should I choose for F31? Still the F020?
2ndly, I've been through tons of forums, videos etc and I noticed in a thread where Almaretto mentioned that people are not using cheat sheets anymore, rather an XML or something. What did he mean by that?

Thanks a ton!

PM sent.

For F20 & F30, the E-Sys Connection Target is F20. The Launcher Car Series though must be set to match actual car designation (e.g. F20, F30, etc.).

Launcher Cheat Codes:

https://www.bimmerfest.com/forums/sh...d.php?t=874588

[ac011]

HI, Shaw

Can you PM me coding for F82 2015

Thanks,

[shawnsheridan]

Originally Posted by ac011

HI, Shaw

Can you PM me coding for F82 2015

Thanks,

PM sent.