F8X M3/M4 Macht Schnell wheel spacer reference thread

[rborane]

Originally Posted by Nick7700

The rears looks fine, but the fronts seems to stick out a tad bit. Does it look that way to you? Otherwise I'll just leave like that. Thanks for your input.

Go 12MM all the way around.

[Nick7700]

Originally Posted by rborane

Go 12MM all the way around.

Do you have any pictures with the 12mm all around? Would like to see and compare.

[Graves]

Originally Posted by Nick7700

The rears looks fine, but the fronts seems to stick out a tad bit. Does it look that way to you? Otherwise I'll just leave like that. Thanks for your input.

No, they are very much even because of the rear wheel width versus the front. Those pictures aren't the best. I'll try and get a better angle. I might go 15mm rear. Still some space to bring the rears out.

[Graves]

Hope this helps. Pretty much dead front without drowning out the rear tire simply because of angle.

[Nick7700]

Originally Posted by Graves

Hope this helps. Pretty much dead front without drowning out the rear tire simply because of angle.

Thanks for taking the pictures. Yeah I guess it was the angle how I was looking at it. Do you plan on putting 15mm in the rear? Are you lowered or on stock settings?

[Graves]

Originally Posted by Nick7700

Thanks for taking the pictures. Yeah I guess it was the angle how I was looking at it. Do you plan on putting 15mm in the rear? Are you lowered or on stock settings?

I might do 15mm rear. There's room for it, would make it look a little more aggressive, but not sure yet. I am on EMD springs.

[VancouverM3]

Ship to Vancouver postal v2t5c8. Standard M3 Stock tire. 15/12?

Upgrading to 285/35/19 and 265/35/19 once tires are cooked.

[S54PLUS1]

Interested in ordering 15F 12R spacers + bolts for my F80 M3. It's on KW HAS maxed in the front and about 3/5 in the rear. Could you shoot me a quote Kevin?

Thanks

[kevin @ eas]

Originally Posted by VancouverM3

Ship to Vancouver postal v2t5c8. Standard M3 Stock tire. 15/12?

Upgrading to 285/35/19 and 265/35/19 once tires are cooked.

Originally Posted by eiman.f80

Interested in ordering 15F 12R spacers + bolts for my F80 M3. It's on KW HAS maxed in the front and about 3/5 in the rear. Could you shoot me a quote Kevin?

Thanks

PM sent

[VancouverM3]

Macht Schnell 15f/15r stock height and tires. Looks great. Pics are right after I took it off the jack stands, suspension needs to resettle.

[Graves]

Originally Posted by VancouverM3

Macht Schnell 15f/15r stock height and tires. Looks great. Pics are right after I took it off the jack stands, suspension needs to resettle.

Looks fantastic. Think I'll do 15mm rear soon.

[bsmf8x]

1. The year/model of your BMW: 2016 non comp F82

2. Wheels/offset:
Stock 437M all around

3. Tire size:
Conti 255/35/19 front 275/35/19, stock size

Might go to 265/285 later

4. Suspension:
Stock adaptive

5. Macht Schnell Spacer size:
Front: 15mm
Rear: 18mm

Will I rub? I might just go with 15mm in the rear if that's not a good idea. Keep in mind I'm on stock suspension but strongly considering getting 285's when these run out.

Looking for front to be flush and rears to be as wide as possible without rubbing. I know 12 in the rear is recommended but it's not aggressive enough for me, I'd only do 15+ and even then I want the 17-18

[spy963]

F80 M3 on stock 437M and Eibach springs.
I run 15mm F on PSS 265/35/19 and I’m good.

I plan to go 285/35 R... what spacers size do you suggest? I want an agressive stance. Please send quote shipped to QC, Canada J7K0T8.

Thanks

[matty088]

Originally Posted by Graves

Alrighty better shot

I don’t understand the ride height numbers you posted. Do you have a measurement from the bottom of the rim to the fender. This seems to be the common measurement for these cars. Mine is 24 5/8 front and 24.25 rear. Was thinking of lowering the rear more.

[Graves]

Originally Posted by matty088

I don’t understand the ride height numbers you posted. Do you have a measurement from the bottom of the rim to the fender. This seems to be the common measurement for these cars. Mine is 24 5/8 front and 24.25 rear. Was thinking of lowering the rear more.

That's the additional drop that the EMD springs give front and rear.

[EricP3]

I just did 15mm front and rear on my stock suspension m3 with 473m wheels. 15mm is great in the back but probably just a tad too much on the front. If I had to do it again I would probably do 12mm front and 15mm rear but it is fine for now.

[OldM3]

15mm all around and lowered to recommended height on MP HAS.

[EricP3]

I feel like my 15mm front stick out a tiny bit farther than all the other pics ive seen but maybe im just crazy or its hard to tell in pics.

[/Angelo/]

I've had the spacers for a while, but here are a few recent shots.

Without spacers


With Macht Schnell spacers




Year/model of your BMW
2020 M4 ZCP

Wheels/offset
Front: 19x9.0 Style 437M, ET29
Rear: 19x10.0 Style 437M, ET40

Tire size
Front: Michelin Super Sport 255/35-19
Rear: Michelin Super Sport 275/35-19

Suspension
Stock, Adaptive M Suspension, Stock springs

Macht Schnell Spacer size
Front: 15mm
Rear: 12mm

[matty088]

Originally Posted by OldM3

15mm all around and lowered to recommended height on MP HAS.

can you take a measurement of the height in the back. the bmw method if possible. From lower rim lip to middle of arch. should be around 24.5 or so.

Ty

[BadBoostedBMWM3]

May I have price for the "proper" set of spacers for f80 dropped a smidgen more than recommended? How far "flush" can I go?
Seems like the consensus is 12/10 OR 15/12

[MACROSS79]

Hi Kevin I have a 2018 zcp can you please send me a quote for 12mmF and 15mmR shipped to 75072 thanks. What would you recommend? I'm with stock 666M wheels and stock suspension thanks