05-10-2023, 11:19 AM | #1 |
Enlisted Member
3
Rep 48
Posts |
x5 10.25" Retrofit with MMI Prime
Hey all,
I recently bought a 10.25" APIX1 X5 screen (non-touchscreen. model #934787801) to retrofit to my MMI Prime system. Since this is APIX1 and my car is MY2017 (iDrive 5), I need to swap the CID cable with a voltage regulated cable (didn't know this at time of purchase.) Has anyone done this retrofit with the MMI Prime before? I want to make sure there are no issues with plugging the voltage regulator cable into the HU.
__________________
2017 M4 ZCP 6MT, Wrapped AD Gloss Rock Grey
VMR V703 + Pilot Sport 4S 19x9.5 et22, 265/35/19 19x10 et38. 285/35/19 Previously: 2014 435i xDrive 6M/T Stage 2 FBO |
Post Reply |
Bookmarks |
|
|