11-25-2020, 01:34 PM | #45 |
Lieutenant Colonel
1948
Rep 1,533
Posts |
Hundreds in the field, 5 stock motor cars in the 9's, better spool and response at a price that isn't gouging. How to make it better? Holiday sales...
https://f80.bimmerpost.com/forums/sh...php?p=26939898 Have a good (and safe!) one! Chris |
Appreciate
0
|
11-25-2020, 02:23 PM | #46 |
Private First Class
213
Rep 186
Posts |
|
Appreciate
0
|
11-25-2020, 02:49 PM | #47 | |
Colonel
2007
Rep 2,746
Posts |
Quote:
Port Injection (PI) as in Intake Manifold - Port Injected fuel supplement * Even fuel distribution across all 6 cylinders * Can be used with any fuel type, but mainly with lower density alcohol-based fuels, such as, ethanol and methanol. * Usually controlled using a batch-fire piggyback system like AIC6 and JB4 >> No known issues with either controller, but certain enthusiasts and those with super serious race builds aren't too fond of this configuration. * Motiv Motorsport recently announced an I/O controller that can supposedly integrate with the factory DME, and possibly have sequential injection control. Meth Injection * For the S55, and many other engine platforms, this usually means feeding methanol into the Charge Pipes (Pre-IC), Charge Air Cooler (for certain units), J-pipe, or Throttle Body (TBI) * Some use this configuration for cooling the charge air (recommended), while others use this configuration as a cheap alternative to PI * No matter how the meth feed is installed, everything has to enter through the throttle body (except for PI using meth fuel; see above) >> This creates an uneven meth distribution in Cylinders 4 and 5, which is why it's not the most ideal way to supplement fuel. Last edited by FriedPiston; 11-25-2020 at 03:27 PM.. |
|
Appreciate
3
|
11-25-2020, 03:24 PM | #48 | |
Colonel
2007
Rep 2,746
Posts |
Quote:
Kratos = solid DBB turbos with smooth runners on turbofold, super fancy packaging, good customer service (very reasonable); never installed, sold to someone who put them to better use. GC+ = cheapest option of the bunch, but I'm very happy with how they perform over the last 900+ miles. Packaging was nothing fancy, but was appropriately filled with packing peanuts. You'll need an aftermarket intake, as well as, trim the Bank 1 silicone inlet tube. Or you can do a DIY improvisation to the factory intake tube using PVC piping. VTT recommends aftermarket intakes for obvious airflow reasons. I've heard of others needing to bend the factory heatshield for fitment. However, I had a local shop install my set, and they didn't mention anything about the heatshield. Some people are probably not going to like hearing this, but I compared the turbofold with the Kratos units, and honestly couldn't tell the difference from a visual observation. Both look very similar. Received a pair with very minor machining imperfection on the turbine housing, in which, Tony offered to swap locally. In my experience, Tony has always been responsive and professional via email. PS2 HF = good top-end performance, time to torque was a bit slow for my liking, developed a major oil leak after ~30k miles (expected due to type of use); sent to Pure for a full rebuild before selling them. A+ customer service from Pure, but packaging was only decent using industrial grade dual-corrugated cardboard and some thermoform foam packaging that left a section of the units exposed. For reference, I sent the turbos using a brand new 7-gallon heavy duty Home Depot tote with 2-3 inches of bubble wrap. Last edited by FriedPiston; 11-25-2020 at 03:30 PM.. |
|
Appreciate
7
M2C_OZ212.50 Chris@VargasTurboTech1947.50 TopJimmy6182.50 ThatBoostedKid14.50 Detoxified208.00 Maxf80M3175.50 Envy ///M327.00 |
11-25-2020, 03:32 PM | #49 | ||
Private First Class
213
Rep 186
Posts |
Quote:
|
||
Appreciate
0
|
11-25-2020, 03:35 PM | #50 |
Colonel
2007
Rep 2,746
Posts |
|
Appreciate
6
M2C_OZ212.50 ///BMW Junkie475.00 Chris@VargasTurboTech1947.50 ThatBoostedKid14.50 Shadow2124.00 Maxf80M3175.50 |
11-26-2020, 02:26 PM | #53 |
Boost Addict
176
Rep 460
Posts |
The oem turbo's are journal bearing as well.
__________________
F80 BMW M3 DCT YMB
2008 BMW E93 6MT, Ess VT2 625 |
Appreciate
0
|
11-27-2020, 03:29 AM | #54 | |
First Lieutenant
261
Rep 389
Posts
Drives: 18 BMW M2LPower
Join Date: Sep 2016
Location: Santo Domingo, Dominican Republic
|
Quote:
__________________
13 BMW 335ix Full Weight 10.64 @129mph N55 WR SOLD
15 BMW M4 Full Weight 10.69@133mph stock turbos SOLD 18 BMW M2LPower 9.69@147.4mph 1.66 60ft michelin 4s tires instagram @luchocampusano YouTube Lucho Campusano |
|
Appreciate
0
|
01-24-2022, 09:48 PM | #55 | |
Registered
0
Rep 4
Posts |
Quote:
Can you write please how much boost and ign you ride ? There is no a lot of timing corrections? My goal is run high 5 sec with 93oct 😍 help me understand how you doing that, I need install and tune my GCs in next week |
|
Appreciate
0
|
07-20-2022, 09:49 AM | #56 |
Second Lieutenant
87
Rep 247
Posts |
Gc turbos
I had mine installed in January and the turbos are great for the price. I did run into a problem with the rear turbo sometimes when not in boost and i floor it it will stay closed. All i would have to do is turn the car off then back on and it's good. These are my numbers with the gc's and 100% meth on e70. Currently installing port injection,lpfp and the reflex controller. I retune on aug 4 will update
|
Appreciate
0
|
07-20-2022, 10:06 AM | #57 | |
BimmerPost Supporting Vendor
26113
Rep 194,538
Posts |
Quote:
Do you know whats causing this issue?
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
0
|
07-21-2022, 05:23 AM | #58 | ||
Second Lieutenant
87
Rep 247
Posts |
Hey
Quote:
|
||
Appreciate
0
|
07-21-2022, 09:28 AM | #59 |
BimmerPost Supporting Vendor
26113
Rep 194,538
Posts |
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
05-11-2023, 07:50 AM | #60 |
Enlisted Member
23
Rep 39
Posts |
Vargas GC Max Turbos
When are the new maxx gonna be released ? i been waiting and quarter 2 -3 of 2023 is now i do believe .... mine are paid for and my car is currently down csause i been waiting for these
|
Appreciate
0
|
12-15-2023, 06:24 PM | #61 |
Enlisted Member
23
Rep 39
Posts |
New vargas gc maxx are garbage
Hello everyone i usally dont post on here but i have to share my horrible experiemce with the company Vargas and their GCMAXX turbos.
So to start off i order these in January which if you read on their website you could preorder cause they are releasing them Quarter 2/3 of 2023 so after waiting for 5 months i finnally got them in August and install them the last week of August. Now i follow their install instructions to the letter and i even went as far as breaking in the turbos with an extra 500 miles on top of the 500 mile break end cause i dont want them coming back and saying they were install correctly! so now fast forward a month with a 93 tune at 29 /30 psi on a built motor and all the extra boltons , with no racing what so ever the car ran fine except when i stopped at a friends shop to chat the car set idle for 10 minutes so when i decided to leave i hear this loud whistling sound and no power so luckyily i was 5 minutes from home called my mechanic he came over after hours and we inspected and found the fins blades were spinning fine no seizure full movement. then we decided to take the back turbo out in which we did and inspected and no damage what so ever everything was in tact and moving as it should .. so i contacted the vendor i go tthe turbos through ENJUKU RACING in which this company is by far top notch to deal with customer service is on point. now i had to reach out to Vargas for a RMA and fill out their repair form . did that in all in good faith i shipped the turbo 2 day air on oct 4th 2023 an dit was delivered on oct 6th 2023 so after waiting a week cause they was not letting me know they got it.. i reaached out and guess what they didnt even checked to see if they got it as i sent them the tracking when i got the tracking number that day... so they telling me tey dont see it send them the rma order form and the tracking i told them i already did but i sent it again. Now they teold me oh its gonna take 2 weeks for them to look at it and see what happen... so mind you on the 3rd week i tried emailing no response , calling is out they never pick up the phone finnally i text the number someone responded .. and wa slike email us . im like i effing did yall dont respond .. so again fast forward i had enjuku racing reach out and they explain that i had alot of car events coming up and wanted to know what was their eta. So here is where it gets awesome.. They email me and Enjuku back and said they will expedite this as the owner Tony is a big car person and he understands ..i call bul shit cause here i am damn near January and still no turbo because they failed to check to see if they had a CHRA kit in which im still baffled as to why you have to rebuild a brand new turbo that just came out in which they keep correcting me and saying that my turbos were not brand new. so guess what they are liars their product is shit and i already yanked them out and will be shiping the one turbo back to the vendor in which they agreed that Vargas customer service and what i went through shouldnt have happen and they are making it right.. so my tuner convinced me to go with a different set up and im just waiting for the turbos to come in... So if you got negative things to say about my post feel free i just wanted to express my experience .And i know if Vargas read this i know they have their version but emails dont lie and the vendor will back my story 100 percent! So again thank you to Enjuku Racing Chris for being the rockstar in all of this . |
Appreciate
0
|
12-15-2023, 06:26 PM | #62 |
Enlisted Member
23
Rep 39
Posts |
Garbage and customer service sucks to
Hello everyone i usally dont post on here but i have to share my horrible experiemce with the company Vargas and their GCMAXX turbos.
So to start off i order these in January which if you read on their website you could preorder cause they are releasing them Quarter 2/3 of 2023 so after waiting for 5 months i finnally got them in August and install them the last week of August. Now i follow their install instructions to the letter and i even went as far as breaking in the turbos with an extra 500 miles on top of the 500 mile break end cause i dont want them coming back and saying they were install correctly! so now fast forward a month with a 93 tune at 29 /30 psi on a built motor and all the extra boltons , with no racing what so ever the car ran fine except when i stopped at a friends shop to chat the car set idle for 10 minutes so when i decided to leave i hear this loud whistling sound and no power so luckyily i was 5 minutes from home called my mechanic he came over after hours and we inspected and found the fins blades were spinning fine no seizure full movement. then we decided to take the back turbo out in which we did and inspected and no damage what so ever everything was in tact and moving as it should .. so i contacted the vendor i go tthe turbos through ENJUKU RACING in which this company is by far top notch to deal with customer service is on point. now i had to reach out to Vargas for a RMA and fill out their repair form . did that in all in good faith i shipped the turbo 2 day air on oct 4th 2023 an dit was delivered on oct 6th 2023 so after waiting a week cause they was not letting me know they got it.. i reaached out and guess what they didnt even checked to see if they got it as i sent them the tracking when i got the tracking number that day... so they telling me tey dont see it send them the rma order form and the tracking i told them i already did but i sent it again. Now they teold me oh its gonna take 2 weeks for them to look at it and see what happen... so mind you on the 3rd week i tried emailing no response , calling is out they never pick up the phone finnally i text the number someone responded .. and wa slike email us . im like i effing did yall dont respond .. so again fast forward i had enjuku racing reach out and they explain that i had alot of car events coming up and wanted to know what was their eta. So here is where it gets awesome.. They email me and Enjuku back and said they will expedite this as the owner Tony is a big car person and he understands ..i call bul shit cause here i am damn near January and still no turbo because they failed to check to see if they had a CHRA kit in which im still baffled as to why you have to rebuild a brand new turbo that just came out in which they keep correcting me and saying that my turbos were not brand new. so guess what they are liars their product is shit and i already yanked them out and will be shiping the one turbo back to the vendor in which they agreed that Vargas customer service and what i went through shouldnt have happen and they are making it right.. so my tuner convinced me to go with a different set up and im just waiting for the turbos to come in... So if you got negative things to say about my post feel free i just wanted to express my experience .And i know if Vargas read this i know they have their version but emails dont lie and the vendor will back my story 100 percent! So again thank you to Enjuku Racing Chris for being the rockstar in all of this . |
Appreciate
0
|
12-15-2023, 06:50 PM | #63 |
Enlisted Member
23
Rep 39
Posts |
GARBAGE
Hello everyone i usally dont post on here but i have to share my horrible experiemce with the company Vargas and their GCMAXX turbos.
So to start off i order these in January which if you read on their website you could preorder cause they are releasing them Quarter 2/3 of 2023 so after waiting for 5 months i finnally got them in August and install them the last week of August. Now i follow their install instructions to the letter and i even went as far as breaking in the turbos with an extra 500 miles on top of the 500 mile break end cause i dont want them coming back and saying they were install correctly! so now fast forward a month with a 93 tune at 29 /30 psi on a built motor and all the extra boltons , with no racing what so ever the car ran fine except when i stopped at a friends shop to chat the car set idle for 10 minutes so when i decided to leave i hear this loud whistling sound and no power so luckyily i was 5 minutes from home called my mechanic he came over after hours and we inspected and found the fins blades were spinning fine no seizure full movement. then we decided to take the back turbo out in which we did and inspected and no damage what so ever everything was in tact and moving as it should .. so i contacted the vendor i go tthe turbos through ENJUKU RACING in which this company is by far top notch to deal with customer service is on point. now i had to reach out to Vargas for a RMA and fill out their repair form . did that in all in good faith i shipped the turbo 2 day air on oct 4th 2023 an dit was delivered on oct 6th 2023 so after waiting a week cause they was not letting me know they got it.. i reaached out and guess what they didnt even checked to see if they got it as i sent them the tracking when i got the tracking number that day... so they telling me tey dont see it send them the rma order form and the tracking i told them i already did but i sent it again. Now they teold me oh its gonna take 2 weeks for them to look at it and see what happen... so mind you on the 3rd week i tried emailing no response , calling is out they never pick up the phone finnally i text the number someone responded .. and wa slike email us . im like i effing did yall dont respond .. so again fast forward i had enjuku racing reach out and they explain that i had alot of car events coming up and wanted to know what was their eta. So here is where it gets awesome.. They email me and Enjuku back and said they will expedite this as the owner Tony is a big car person and he understands ..i call bul shit cause here i am damn near January and still no turbo because they failed to check to see if they had a CHRA kit in which im still baffled as to why you have to rebuild a brand new turbo that just came out in which they keep correcting me and saying that my turbos were not brand new. so guess what they are liars their product is shit and i already yanked them out and will be shiping the one turbo back to the vendor in which they agreed that Vargas customer service and what i went through shouldnt have happen and they are making it right.. so my tuner convinced me to go with a different set up and im just waiting for the turbos to come in... So if you got negative things to say about my post feel free i just wanted to express my experience .And i know if Vargas read this i know they have their version but emails dont lie and the vendor will back my story 100 percent! So again thank you to Enjuku Racing Chris for being the rockstar in all of this . |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|