|
Post Reply |
|
Thread Tools | Search this Thread |
01-18-2020, 06:04 PM | #68 |
Just1MoreMod
360
Rep 712
Posts |
__________________
Stage 3 - Pure Turbo F80 M3
Dinan Infested F48 X1 |
Appreciate
0
|
01-19-2020, 10:52 AM | #69 |
Colonel
497
Rep 2,152
Posts |
so here is mine.. i whacked a bit of copper grease on there to see where it was catching and as you can see its been catching on the bonnet...
that pipe looks way to high but its on as far as it can go on the turbo. thinking i should remove and cut a small bit off the bottom and maybe a small bit off the top to get it to sit tighter? tom @ eas what are your thoughts you must of fitted loads of these
__________________
Current: BMW M4 F83 - Mods : Pedal Covers, LCI Stereo facia Retrofit and Carbon Rear corner covers
Old: F32 435d M Sport - Mods : HR Sport Springs, 20" Veemann V-FS23 in Gun Metal, M Performance Body Kit, Pedal Covers, Eurspec CF Mirror Caps, More-BHP remap 364 BHP 741 NM, M4 Under Chassis Brace, 15mm Rear ARB, 8.8" Screen Retrofit and LCI Stereo facia Retrofit Last edited by Smee; 01-19-2020 at 10:58 AM.. |
Appreciate
0
|
01-19-2020, 11:40 AM | #70 | |
Just1MoreMod
360
Rep 712
Posts |
Quote:
__________________
Stage 3 - Pure Turbo F80 M3
Dinan Infested F48 X1 |
|
Appreciate
1
behindthen0thing842.00 |
01-19-2020, 02:52 PM | #71 |
Colonel
497
Rep 2,152
Posts |
i think that an illusion from the angle
__________________
Current: BMW M4 F83 - Mods : Pedal Covers, LCI Stereo facia Retrofit and Carbon Rear corner covers
Old: F32 435d M Sport - Mods : HR Sport Springs, 20" Veemann V-FS23 in Gun Metal, M Performance Body Kit, Pedal Covers, Eurspec CF Mirror Caps, More-BHP remap 364 BHP 741 NM, M4 Under Chassis Brace, 15mm Rear ARB, 8.8" Screen Retrofit and LCI Stereo facia Retrofit |
Appreciate
0
|
03-10-2020, 06:24 PM | #72 |
Colonel
3299
Rep 2,164
Posts |
SSR performance charge pipes fit really well, no issues with the stock airbox but you still need to adjust the rear mount for the engine cover for it to fit. The pipes look a bit blingy as well if you're going for the stealth look.
Last edited by DanMpower; 03-14-2020 at 03:51 AM.. |
Appreciate
0
|
09-09-2020, 08:15 PM | #73 |
Second Lieutenant
199
Rep 253
Posts |
Do you have any pics of the install/fitment?
__________________
-PCA Instructor #201804533
-F80 ZCP DCT (BM3 Stg 2), B58 xDrive 6MT (BM3 Stg 1), 718 Boxster GTS 6MT (APR Stg 1) -My B58 F30 Build Thread https://f30.bimmerpost.com/forums/sh....php?t=1981176 -My F80 Build Thread (sold) https://f80.bimmerpost.com/forums/sh....php?t=1757458 |
Appreciate
0
|
09-09-2020, 09:24 PM | #74 | |
Major General
6175
Rep 5,542
Posts |
Quote:
Alternatively you can check the install and make sure the tubes are pushed down HARD on the turbo outlet adapters and then clamped (need a buddy, clamp AFTER adapter is on turbo for tightest fit). On the TMIC side you could use a mechanic pick or small screwdriver to get the silicone tube up over the stopper rings on the OEM TMIC inlets. It's not the prettiest fit but it helps you figure how to tweak before cutting. The silicone stretches right back into shape so don't worry about dents or rings showing later.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
|
Appreciate
0
|
09-13-2020, 01:45 PM | #76 |
I Drag Race My Track Car
201
Rep 226
Posts |
I can second that my CTS charge pipes fit fine. They do touch in a few places but you have to spend the time to make sure they aren't touching but it can be done.
I was worried about the seal since they seem to not be as tight over the turbos as OEM, but I boost leak tested and it seemed fine.
__________________
ProSpoolFreaks Tuning E85
CBC Squad |
Appreciate
0
|
09-13-2020, 01:56 PM | #77 |
Private
109
Rep 72
Posts |
|
Appreciate
0
|
09-14-2020, 09:58 AM | #79 |
Second Lieutenant
199
Rep 253
Posts |
Including fitting below the engine cover?
__________________
-PCA Instructor #201804533
-F80 ZCP DCT (BM3 Stg 2), B58 xDrive 6MT (BM3 Stg 1), 718 Boxster GTS 6MT (APR Stg 1) -My B58 F30 Build Thread https://f30.bimmerpost.com/forums/sh....php?t=1981176 -My F80 Build Thread (sold) https://f80.bimmerpost.com/forums/sh....php?t=1757458 |
Appreciate
0
|
09-14-2020, 10:33 AM | #80 |
Private
109
Rep 72
Posts |
|
Appreciate
0
|
09-14-2020, 10:58 AM | #81 | |
Second Lieutenant
199
Rep 253
Posts |
Quote:
And I'm also pleased that the sticker can be removed. Thanks again for clearing all that up. It eases my mind about buying a big custom product like this from Taiwan!
__________________
-PCA Instructor #201804533
-F80 ZCP DCT (BM3 Stg 2), B58 xDrive 6MT (BM3 Stg 1), 718 Boxster GTS 6MT (APR Stg 1) -My B58 F30 Build Thread https://f30.bimmerpost.com/forums/sh....php?t=1981176 -My F80 Build Thread (sold) https://f80.bimmerpost.com/forums/sh....php?t=1757458 |
|
Appreciate
0
|
09-14-2020, 11:31 AM | #82 |
Captain
577
Rep 941
Posts |
Here are my ESS.
There may be very minor contact at these two points. Am I failing to appreciate the significance here? To me, this doesn't appear to be an issue. I would consider these great firmest. There was no tweaking to these hoses.
__________________
Previously:
2010 E92 335 (6MT) 2011 E92 M3 ZCP (6MT) |
Appreciate
1
TopJimmy6175.00 |
09-14-2020, 02:02 PM | #83 |
Colonel
3299
Rep 2,164
Posts |
I think with any contact point even minor will wear down over time with all the engine movement.
|
Appreciate
0
|
09-14-2020, 08:00 PM | #84 |
Major General
6175
Rep 5,542
Posts |
My VTT tubes touch in a few spots. Aside from rub marks there seems to be no probs at all after a year. These things are 7 layer silicone with steel fibers between...ultra durable. Same with ESS, top shelf stuff.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
0
|
09-15-2020, 06:09 PM | #86 |
New Member
0
Rep 12
Posts |
|
Appreciate
0
|
09-15-2020, 08:02 PM | #87 | |
Lieutenant
153
Rep 511
Posts |
Quote:
order for the engine cover to snap in properly but, that's standard protocol with any continuously symmetrical inside diameter pipes. CR Racing is exorbitantly priced! Maybe now that Eventuri's (C.F.) out they will (be forced to) get real but, CR is so hard to contact, I don't believe they're that interested in sales outside of the Asian market. Eventuri has the right idea. Both the upper as well as the lower connections are done with with Al. couplers due to the inherent movement involved in thier application. Also, the C.F. used is a special heat resistant formulation hence, why they're only available in a "Raw" finish. Cheers!
__________________
///M Joy
|
|
Appreciate
0
|
09-15-2020, 08:14 PM | #88 | |
Lieutenant
153
Rep 511
Posts |
Quote:
In reference to your second photo here, Have you tried loosening and then readjusting the connection points to the IC. Knudging the Charge Pipes in tighter to the IC couplings will result in lowering them a bit. Cheers!
__________________
///M Joy
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|