EDC F8x Guys - Stop Wasting Money

[supremepower]

Originally Posted by tropicatango

Pm me price for a set of bilstein damptronic, thanks

$3695 shipped anywhere in Continental USA

Originally Posted by bmpclc

also interested Bilstein Damptronic Electronic for EDC M3.

Thanks

$3695 shipped anywhere in Continental USA

Originally Posted by BzsBimmer

#metoo for quote

Originally Posted by milk242

Anyone know the minimum drop height? Don't want to drop the rear much if at all.

30-40mm front
5-25mm rear

Originally Posted by ctgeorge

FINALLY!!

I'm holding off until we hear some feedback / reviews on this kit. Would hate to experience a defective part, only to have to wait another six months to a year for a replacement. Also curious on the minimum drop etc.

We have quite a few available so its an active part number now.

30-40mm front
5-25mm rear

But yes finally!

Originally Posted by EricSMG

These honestly seem like an expensive PSS10 with 7 less settings and no ability to tune the front separate from the rears.

Meh, I'd just go with the 10s and save a grand.

Can get you set up w whichever kit you would like....

[EricSMG]

What's the PSS10 price?

[FTP20]

Does anyone know the spring rates? Are the springs rates for the F8X PSS10 and Damptronic kits the same?'

[ntg44]

This is exactly what I'm looking for. Secretly and patiently waiting for my lowering springs to wear out the shocks so I can justify this whole kit vs buying a new set of OEM shocks

[supremepower]

Originally Posted by EricSMG

What's the PSS10 price?

No stock in USA. I am checking for current pricing from an alternative supplier

Originally Posted by FTP20

Does anyone know the spring rates? Are the springs rates for the F8X PSS10 and Damptronic kits the same?'

They dont publish the spring rates but would imagine its the same...

Originally Posted by ntgarage44

This is exactly what I'm looking for. Secretly and patiently waiting for my lowering springs to wear out the shocks so I can justify this whole kit vs buying a new set of OEM shocks

Ready when you are!

[petrolhead.]

I'm interested in the spread between comfort, sport and sport+ on this kit. I hope the spread is a bit wider than on the stock setup - meaning that comfort could be a slightly bit softer for my taste (on the M3 ZCP) with 20" wheels. Then sport should be a great all-round mode for the track (e.g. Nordschleife).

[omega2733]

supremepower what are the spring rates front/rear?

[supremepower]

Originally Posted by omega2733

supremepower what are the spring rates front/rear?

No idea. They dont publish this info.

We will be doing an install this week and will post lots of pics and feedback for you guys

[joooiiiiii]

Originally Posted by supremepower

No idea. They dont publish this info.

We will be doing an install this week and will post lots of pics and feedback for you guys

Would love to see this review. Thanks!

[Chris N]

Originally Posted by supremepower

We will be doing an install this week and will post lots of pics and feedback for you guys

I am interested in buying, after unbiased installation and performance reviews.

[ntg44]

Originally Posted by Chris N

I am interested in buying, after unbiased installation and performance reviews.

Agree, but I don't think you're going to get an unbiased review until an end customer takes the plunge and gives their feedback. I'm really interested in these too, but will not be a guinea pig for a $3500+ product.

[Alvinized52]

Sub’d .... any feedback/reviews on this yet?

[supremepower]

Installed on Cura8tor's F80 M3 yesterday.

He will be posting up his feedback after he gets some time behind the wheels

Everything worked flawlessly and the EDC is working an no errors or coding required

[ntg44]

Originally Posted by supremepower

Installed on Cura8tor's F80 M3 yesterday.

He will be posting up his feedback after he gets some time behind the wheels

Everything worked flawlessly and the EDC is working an no errors or coding required

Looking forward to the review.

Question regarding drop heights. You mentioned it's 30-40mm front / 5-25mm rear. Is there a recommended setting for front/rear drop together in the product documentation? For example, is the minimum drop of 30mm front / 5mm rear less than ideal than 30mm front / 15mm rear for example? If I was to buy this kit, I would be setting it to the minimum drop on both front and rear, so 30mm / 5mm, so this bit of information would be pretty important for a future purchase.

Thanks in advance

[clutchdj]

I think I am going to order a set and just hang on them on my wall.

[ptper]

Originally Posted by supremepower

Installed on Cura8tor's F80 M3 yesterday.

He will be posting up his feedback after he gets some time behind the wheels

Everything worked flawlessly and the EDC is working an no errors or coding required

How long did the install take?

[supremepower]

Originally Posted by ntgarage44

Looking forward to the review.

Question regarding drop heights. You mentioned it's 30-40mm front / 5-25mm rear. Is there a recommended setting for front/rear drop together in the product documentation? For example, is the minimum drop of 30mm front / 5mm rear less than ideal than 30mm front / 15mm rear for example? If I was to buy this kit, I would be setting it to the minimum drop on both front and rear, so 30mm / 5mm, so this bit of information would be pretty important for a future purchase.

Thanks in advance

They dont give recommended settings but you can for sure do the minumums. We were waiting for the springs to settle and we will be doing adjustments and further set up on scales and on the alignment rack. More details as we get them. We can help you w the ride height set up too....

Originally Posted by clutchdj

I think I am going to order a set and just hang on them on my wall.

Lets do it! Free frame included! LOL!

Originally Posted by ptper

How long did the install take?

Its a good 1/2 day install. Figure 4 hours for someone with moderate installation skills.

[ptper]

Originally Posted by supremepower

They dont give recommended settings but you can for sure do the minumums. We were waiting for the springs to settle and we will be doing adjustments and further set up on scales and on the alignment rack. More details as we get them. We can help you w the ride height set up too....

Lets do it! Free frame included! LOL!

Its a good 1/2 day install. Figure 4 hours for someone with moderate installation skills.

Did you happen to take pics of the install?

[spr]

I'm interested in a kit. Please pm on how to buy and delivery time. Also, are the springs linear? Kw are progressive and I'm not into progressive springs. That said, I'm one of the few people who ran the older iteration on my e92 and absolutely loved them. I can't believe how bad - soft and uncontrolled the stock fix suspension is. My oem springs and shocks with 80k miles on my e92 were immensely superior.

[Mikecom32]

supremepower any updates with reviews from customers? I'm curious how the ride is compared to a stock competition pack car with EDC.

[BzsBimmer]

Originally Posted by Mikecom32

supremepower any updates with reviews from customers? I'm curious how the ride is compared to a stock competition pack car with EDC.

I can’t comment on the comp pack, but I have the Damptronic setup. Several of us have it, just search for the feedback.

[PKL]

Originally Posted by supremepower

We will be doing an install this week and will post lots of pics and feedback for you guys

I'm in for the photos, over a year later!