Remove top speed governor

crashtestdummy81 · 09-26-2014, 09:31 PM

I think I saw a VO code somewhere to remove the 250Km/h (155mph) limiter. I'll try to find it again later.
Never done any coding before so no idea which units would need updating

shawnsheridan · 09-26-2014, 09:36 PM

Quote:

Originally Posted by crashtestdummy81

I think I saw a VO code somewhere to remove the 250Km/h (155mph) limiter. I'll try to find it again later.
Never done any coding before so no idea which units would need updating

It is the VMAX setting, but after 10 hours, DME is locked, and DEM cannot be changed.

Deviant · 09-26-2014, 09:45 PM

Quote:

Originally Posted by MasterC17

I'm still under the break-in service, but as far as I know the speed limiter is set at 167mph. That's what it was on both of my E60 M5's. Would be nice to delete it though, I'm sure someone will (legitimately) figure out how to do it at some point.

Finally someone posts the true max speed. 167 not 155.

crashtestdummy81 · 09-27-2014, 11:46 AM

http://www.bmw-vin.com/sample.html

VO code 231 : Deleted: 250 km/h limitation

shawnsheridan · 09-27-2014, 11:52 AM

Quote:

Originally Posted by crashtestdummy81

http://www.bmw-vin.com/sample.html

VO code 231 : Deleted: 250 km/h limitation

It doesn't work.

svc0x80 · 09-27-2014, 04:07 PM

Quote:

Originally Posted by shawnsheridan

It is the VMAX setting, but after 10 hours, DME is locked, and DEM cannot be changed.

Do do have any other information regarding this?

I assume it would be doable with ESYS as long as I code before the first 10 hours of run time are up.

Thanks!

shawnsheridan · 09-27-2014, 06:45 PM

No other information, sorry. It should be doable just by changing the VMAX setting in DME with E-Sys as soon as you take delivery of the car.

FeeBear · 10-07-2014, 12:42 PM

Hey Shawn,

Might be a stupid question but why we we assume the car from creation to delivery wouldn't be on for at least 10 hours? Or is 10 out of Delivery Mode?

Fee

RingMeister01 · 10-07-2014, 07:54 PM

I'd like this clarified as well guys

Thanks

gogoevo · 10-07-2014, 08:04 PM

Quote:

Originally Posted by gmazet

so many nanny's judges and cops out there. guy asks a question, he doesn't need someone challenging it, just answer the bloody question or move on already...

+1

svc0x80 · 10-07-2014, 08:41 PM

It looks like 0xEE should set the top speed to 305km/h (190mph) for VMAX.

RingMeister01 · 10-08-2014, 06:48 AM

Quote:

Originally Posted by FeeBear

Hey Shawn,

Might be a stupid question but why we we assume the car from creation to delivery wouldn't be on for at least 10 hours? Or is 10 out of Delivery Mode?

Fee

Sorry guys but is there an answer to when the 10 hour clock starting ticking in the DME??

shawnsheridan · 10-12-2014, 09:17 AM

Quote:

Originally Posted by FeeBear

Hey Shawn,

Might be a stupid question but why we we assume the car from creation to delivery wouldn't be on for at least 10 hours? Or is 10 out of Delivery Mode?

Fee

It's 10 "Operating Hours", which my thinking is it starts the moment the engine is first fired up.

If you examine DME CAFD's boolean logic, you will find that the VMAX-Codierung executes job 'CBZ_ACT_COND_JOB', which for F10 is the MCD3_CBZActivationCondition javaclass, which in turn contains a BSZlt10h job. I am pretty sure BSZlt = Betriebsstundenzaehler = Operating hours, and 10h = 10 hours.

DocWeatherington · 10-12-2014, 01:58 PM

Quote:

Originally Posted by shawnsheridan

It's 10 "Operating Hours", which my thinking is it starts the moment the engine is first fired up.

If you examine DME CAFD's boolean logic, you will find that the VMAX-Codierung executes job 'CBZ_ACT_COND_JOB', which for F10 is the MCD3_CBZActivationCondition javaclass, which in turn contains a BSZlt10h job. I am pretty sure BSZlt = Betriebsstundenzaehler = Operating hours, and 10h = 10 hours.

I have no idea what your talking about, but it makes me the car guy in me WET... Very, Very WET

Jdebitjr · 10-12-2014, 09:18 PM

Quote:

Originally Posted by DocWeatherington

Quote:

Originally Posted by shawnsheridan

It's 10 "Operating Hours", which my thinking is it starts the moment the engine is first fired up.

If you examine DME CAFD's boolean logic, you will find that the VMAX-Codierung executes job 'CBZ_ACT_COND_JOB', which for F10 is the MCD3_CBZActivationCondition javaclass, which in turn contains a BSZlt10h job. I am pretty sure BSZlt = Betriebsstundenzaehler = Operating hours, and 10h = 10 hours.

I have no idea what your talking about, but it makes me the car guy in me WET... Very, Very WET

That made me laugh out loud. But I agree.

Thanks for all of your contributions, Shawn.

shawnsheridan · 10-13-2014, 07:20 PM

Quote:

Originally Posted by Jdebitjr

That made me laugh out loud. But I agree.

Thanks for all of your contributions, Shawn.

KubaM4 · 10-15-2014, 07:32 PM

I agree had it pinned for a while at 166-167 will not go any further....

brian99997 · 01-23-2015, 12:16 PM

My car was delivered with about 5 hours on it and I am still under 10, can anybody help me find the vmax setting? I looked under dme and this is about the closest I can find. or do I just need to change unknown to 327?

BRM6 · 02-01-2015, 07:57 PM

Have you figured it out?

SOM3 · 02-02-2015, 09:08 AM

Quote:

Originally Posted by KubaM4

I agree had it pinned for a while at 166-167 will not go any further....

Down the hill it'll get to 169-170 MPH speedo indicated.

F80M4ROCKS · 02-04-2015, 05:35 AM

Quote:

Originally Posted by SOM3

Quote:

Originally Posted by KubaM4

I agree had it pinned for a while at 166-167 will not go any further....

Down the hill it'll get to 169-170 MPH speedo indicated.

I agree, after getting use to the power I finally gunned my down 95 and the fastest I could get to was 169, and I was pushing it for a while

brian99997 · 02-11-2015, 06:56 PM

Even Dinan is stumped apparently for the moment

"The tune does not remove the top speed governor but we are actively working on a potential solution for that problem. Whether or not ultimately it will just be an additional firmware update to the existing box or require an additional cable is yet to be determined."

09-26-2014, 09:31 PM	#23
crashtestdummy81 Private First Class 25 Rep 102 Posts Drives: YMB F83 Join Date: Jul 2014 Location: UK iTrader: (0)	I think I saw a VO code somewhere to remove the 250Km/h (155mph) limiter. I'll try to find it again later. Never done any coding before so no idea which units would need updating
	Appreciate 0 Quote

09-27-2014, 11:46 AM	#26
crashtestdummy81 Private First Class 25 Rep 102 Posts Drives: YMB F83 Join Date: Jul 2014 Location: UK iTrader: (0)	http://www.bmw-vin.com/sample.html VO code 231 : Deleted: 250 km/h limitation
	Appreciate 0 Quote

09-27-2014, 06:45 PM	#29
shawnsheridan General 10445 Rep 40,789 Posts Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX iTrader: (0) Garage List 2018 F06 Alpina B6 ... [8.35]	No other information, sorry. It should be doable just by changing the VMAX setting in DME with E-Sys as soon as you take delivery of the car. __________________ 2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
	Appreciate 0 Quote

10-07-2014, 12:42 PM	#30
FeeBear Fee 13 Rep 249 Posts Drives: F82 SO M4 Join Date: Nov 2005 Location: Austin, Texas iTrader: (0) Garage List 2018 BMW X2 [0.00]	Hey Shawn, Might be a stupid question but why we we assume the car from creation to delivery wouldn't be on for at least 10 hours? Or is 10 out of Delivery Mode? Fee
	Appreciate 0 Quote

10-07-2014, 07:54 PM	#31
RingMeister01 Croatian 884 Rep 3,613 Posts Drives: PORSCHE Join Date: Dec 2012 Location: NYC iTrader: (0) Garage List '18 Panamera Turbo [0.00] '17 991.2 Carrera G ... [0.00]	I'd like this clarified as well guys Thanks __________________ NARDO GREY '18 PANAMERA TURBO Ducati V4 S Corse (track only) Husqvarna FS450 (track only) Looking for an SUV
	Appreciate 0 Quote

10-07-2014, 08:41 PM	#33
svc0x80 Private First Class 8 Rep 110 Posts Drives: F82 Join Date: Mar 2014 Location: USA iTrader: (0)	It looks like 0xEE should set the top speed to 305km/h (190mph) for VMAX.
	Appreciate 0 Quote

10-15-2014, 07:32 PM	#39
KubaM4 Private 5 Rep 60 Posts Drives: 2015 M4 Join Date: Sep 2014 Location: central nj iTrader: (0)	I agree had it pinned for a while at 166-167 will not go any further....
	Appreciate 0 Quote

01-23-2015, 12:16 PM	#40
brian99997 Second Lieutenant 45 Rep 202 Posts Drives: slowly Join Date: Jul 2012 Location: United States iTrader: (0)	My car was delivered with about 5 hours on it and I am still under 10, can anybody help me find the vmax setting? I looked under dme and this is about the closest I can find. or do I just need to change unknown to 327? Attached Images Last edited by brian99997; 01-23-2015 at 12:52 PM..
	Appreciate 0 Quote

02-01-2015, 07:57 PM	#41
BRM6 Private First Class 11 Rep 182 Posts Drives: 328/335/M235i/M4 - Current M6 Join Date: Jul 2012 Location: BR & PT iTrader: (0)	Have you figured it out?
	Appreciate 0 Quote

02-11-2015, 06:56 PM	#44
brian99997 Second Lieutenant 45 Rep 202 Posts Drives: slowly Join Date: Jul 2012 Location: United States iTrader: (0)	Even Dinan is stumped apparently for the moment "The tune does not remove the top speed governor but we are actively working on a potential solution for that problem. Whether or not ultimately it will just be an additional firmware update to the existing box or require an additional cable is yet to be determined."
	Appreciate 0 Quote