Anyone connect AA midpipe to AWE switchpath rear?

[M3WAL]

I have AWE switchpath non resonated on rn. I love it but i kinda miss the deep sound from the AA midpipe...Was wondering if its possible to connect these two? Searched the forums couldnt find anything.

[M3WAL]

bump. anyone know if this is possible at least?

[JamesGames]

Anything is possible; but if your question is if it bolts on, no. As far as I know only dinan / active / remus rear sections are bolt on. You will have to cut and weld.

[mike@x-ph.com]

Never sold this combo, its mostly REMUS + AA

That being said it should work, worst case scenario you wield it on

[jpy1980]

Sorry to reserve an old thread, but when AA comes out with their new EL midpipe, I’ll see if it bolts onto my AWE Switchpath exhaust. If it doesn’t, then, I’ll be the guy that welded it on

[DanMpower]

Originally Posted by jpy1980

Sorry to reserve an old thread, but when AA comes out with their new EL midpipe, I’ll see if it bolts onto my AWE Switchpath exhaust. If it doesn’t, then, I’ll be the guy that welded it on

You'll probably need some kind of adapter for any hope of a bolt-on installation. The piping on the AWE is massive compared to the AA connecting pipes, AWE uses 3" piping. At the least, you'll need to do some custom fabrication and welding.