11-27-2022, 08:49 AM | #1 |
The Gentlem4n
6
Rep 8
Posts |
Square wheels setup
Hey everyone. I'm running stocks 19" wheels with 255 in the front and 275 in the rear. Looking for tips on what size fitment would be ideal for a square setup. I was looking at dropping down to 18" rims as well. My only concern is will I need spacers for the front or rear and how will the brakes fit onto lower sized wheels. Any info and help would be appreciated.
|
11-27-2022, 01:01 PM | #2 |
Major General
5450
Rep 5,143
Posts |
Check out the F8X fitment guide from Apex:
https://support.apexraceparts.com/hc...-Fitment-Guide Sounds like you might want some EC7 in 18x10ET25 with 275/35/18 tires (Supercar 3R?). If you're lowered on HAS then your fronts might need a 5mm spacer depending on drop and tire side clearance to the spring spanner nut.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
1
the_gentlem4n6.00 |
11-27-2022, 06:50 PM | #3 | |
The Gentlem4n
6
Rep 8
Posts |
Quote:
|
|
Appreciate
0
|
11-28-2022, 07:19 AM | #4 |
Major General
5450
Rep 5,143
Posts |
The Apex recommendation is what I'd go with for track. They know…
I run drags so I'm staggered for maximum rear grip, 19x9.5 and 11.5 with 265 and 315s (RT660). My 18" Apex rears were 11.0 with 315 Hoosier DR2s.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
1
the_gentlem4n6.00 |
Post Reply |
Bookmarks |
|
|