12-05-2020, 07:56 PM | #287 |
Lieutenant
1478
Rep 599
Posts |
I think so. From what I've read, its very similar. The single mid removes the rasp, but the EL's appear to be a step above and align the pulse from the 2 banks. The result is a 6 cylinder like note.
|
Appreciate
0
|
12-26-2020, 01:15 PM | #288 |
Mike: Everyone's Pal
2044
Rep 2,972
Posts
Drives: F80 M3
Join Date: May 2013
Location: Eastern Long Island
|
here is a better video-
__________________
Alpine MSS Stage 2+ E30 tune|MST Intakes|VRSF Single Mid Pipe|Agency Power Intercooler|VTT Full solution crank hub fix |
Appreciate
0
|
12-26-2020, 01:40 PM | #290 |
Mike: Everyone's Pal
2044
Rep 2,972
Posts
Drives: F80 M3
Join Date: May 2013
Location: Eastern Long Island
|
__________________
Alpine MSS Stage 2+ E30 tune|MST Intakes|VRSF Single Mid Pipe|Agency Power Intercooler|VTT Full solution crank hub fix |
Appreciate
0
|
12-28-2020, 06:21 PM | #291 |
Mike: Everyone's Pal
2044
Rep 2,972
Posts
Drives: F80 M3
Join Date: May 2013
Location: Eastern Long Island
|
here is 5 mins of inside the cabin, in case people were wondering how it sounds inside the car.
__________________
Alpine MSS Stage 2+ E30 tune|MST Intakes|VRSF Single Mid Pipe|Agency Power Intercooler|VTT Full solution crank hub fix |
Appreciate
1
KeyBoy34.00 |
12-30-2020, 12:44 AM | #293 |
Brigadier General
1549
Rep 3,788
Posts |
|
Appreciate
0
|
12-30-2020, 06:11 AM | #294 |
Brigadier General
1836
Rep 4,203
Posts |
as the system heats up the pipes move a lot..... the old M-Performance exhaust used to move back 1/2 in when the flex joints heated up and expanded. They is why in the install instructions they tell you to tilt the rubber bracket doughnuts forward so they can travel backwards. You exhaust is heating up. moving and touching something it things are not loose. Who ever installed should have ensured adequate clearances and yes you have to space the cross brace or leave it off. it is all here....
There should be VRSF cross braces soon...... https://f80.bimmerpost.com/forums/sh....php?t=1726918 |
Appreciate
0
|
12-30-2020, 08:59 PM | #295 | |
Private First Class
27
Rep 146
Posts |
Quote:
Yes, i have spacers for the brace, looks to be the heatshield touching, with all clamps loose I wasn't able to pull it any further from the shield, any suggestions? |
|
Appreciate
0
|
01-07-2021, 09:25 PM | #296 |
Enlisted Member
43
Rep 31
Posts |
|
01-08-2021, 01:26 PM | #299 |
Mike: Everyone's Pal
2044
Rep 2,972
Posts
Drives: F80 M3
Join Date: May 2013
Location: Eastern Long Island
|
haha certainly not this bunch
__________________
Alpine MSS Stage 2+ E30 tune|MST Intakes|VRSF Single Mid Pipe|Agency Power Intercooler|VTT Full solution crank hub fix |
Appreciate
1
terahertz162.50 |
07-12-2021, 11:19 PM | #304 |
Brigadier General
1549
Rep 3,788
Posts |
|
Appreciate
0
|
07-13-2021, 04:03 AM | #305 |
Brigadier General
1836
Rep 4,203
Posts |
Yes very interesting....... I thought he was to satisfy his earlier customers as promised. Maybe they are supplying direct from overseas supplier on the new deliveries but extras have not made it to him yet. Guess one of us need to inquire
|
Appreciate
0
|
07-13-2021, 05:20 PM | #306 |
Captain
380
Rep 988
Posts |
I believe we did get left out, just like the people waiting to see data from there top mount intercooler they’ll never see the data as we will not see the brace.
|
Appreciate
0
|
07-21-2021, 01:44 AM | #307 |
Registered
0
Rep 3
Posts |
Anyone have issues with clamp leaking from the end muffler side? Just installed mine and there’s air leak and water leak by the muffler. Any ideas will be greatly appreciated clamps doesnt seem to seal.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|