666m Shadow Wheel Touchup Advice Needed

[genge24]

I bought a used set of 666m shadow line wheels. A couple of the wheels have minor scuff marks, and the dark lacquer/coating by the center cap of one of the wheels is slightly peeling. Anyone have experience touching up these wheels? I’m looking for a recommendation for a paint or dark/smoked lacquer that can blend in with the wheels fairly well. The issues are minor, so I’m not looking to refinish any of the wheels. Thanks.

[weytie]

I've done my 666M with dark finish to my wheel repair shop.
I had 2 rims with slight curb damage.

So i opted to do all 4 rims, they repair damage, CNC machine them, and then apply dark clearcoat (powdercoated)

They say they will just be like OEM finish.

Will cost me about 550-600 USD to do all of them.

[genge24]

Originally Posted by weytie

I've done my 666M with dark finish to my wheel repair shop.
I had 2 rims with slight curb damage.

So i opted to do all 4 rims, they repair damage, CNC machine them, and then apply dark clearcoat (powdercoated)

They say they will just be like OEM finish.

Will cost me about 550-600 USD to do all of them.

Thanks for the feedback. If I had significant damage, I think I’d spend the money to refinish all of them. At this point, I’m looking for recommendations on a dark clear coat that will get the job done.

[FLgirl]

I would say, just make sure you find someone that really knows what they are doing. I had to get one of mine touched up after a slight curbage and had to have him fix it twice. It's still not as good as I had hoped, but these wheels are a pain to fix.