F82 and 285/35/20

[6SPD GOD]

Any feedback on R888R 285/35/20 tires on rear ZCP wheels on a F82?

Would they NOT rub without spacers?

I got spacers on and the tire is rubbing against the quarter panel on turns.

I have yet to remove the spacers 20mm spacers.

I'm trying to figure out if anyone has some experience with this particular set up before I take any further action. The car has a wrap, so I don't want to destroy the film.

Would a spacer-less set up solve the rubbing?

[McBobby Jr]

Over a year and no response, I'm trying to figure out the same thing and haven't seen anybody comment on running a 35 tall tire on the 20" ZCP Wheels. I would like to run a 285/30/20 R888R in the rear, but a 285/35/20 would grab much better.

[6SPD GOD]

Originally Posted by McBobby Jr

Over a year and no response, I'm trying to figure out the same thing and haven't seen anybody comment on running a 35 tall tire on the 20" ZCP Wheels. I would like to run a 285/30/20 R888R in the rear, but a 285/35/20 would grab much better.

Thank you!

I ran 15mm spacer with 285/35/20 on the rear on stock a ZCP twice. Zero traction issues, zero fitment issues, zero rubbing issues. Totally recommend.

The rubbing from the original post came from 20mm spacers.

[McBobby Jr]

Originally Posted by 6SPD GOD

Thank you!

I ran 15mm spacer with 285/35/20 on the rear on stock a ZCP twice. Zero traction issues, zero fitment issues, zero rubbing issues. Totally recommend.

The rubbing from the original post came from 20mm spacers.

I'm curious as to how they look, got photos of your setup?