06-04-2020, 09:47 AM | #1 |
First Lieutenant
94
Rep 326
Posts |
New Owner M4 problems..?¿
Hello from Spain, I already bought my M4 in Germany, it has come with some bugs that after deleting them are still present to see if you can help me. It has no license plates so I have not used it yet just start it in the garage. Bring this accessory connected to the obd2 .. Thank you
|
06-04-2020, 03:19 PM | #2 |
Major General
5459
Rep 5,152
Posts |
What modifications came with the car?
The 180101 is a low-side O2 sensor error possibly from hi-flow or catless DPs. Maybe someone did a quickie DP install and twisted/ruined a wire? Do you have an aftermarket exhaust and the valve plugs are disconnected? I see a can flap module box in your pix.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
0
|
06-04-2020, 05:10 PM | #3 |
First Lieutenant
94
Rep 326
Posts |
The car, it is supposed to be all stock ... I know it was originally fitted with an M-performance exhaust ... I don't know if they ever installed a downpipe ... but right now it is not installed
The module box you know how it works .. is it automatic when connecting to obd or is it configured with some oem buttons in the car? Thanks |
Appreciate
0
|
06-05-2020, 09:08 AM | #4 |
///M Powered for Life
11480
Rep 10,328
Posts |
The box seems to be an aftermarket controller to open/close the valves at will
|
Appreciate
0
|
06-05-2020, 11:54 AM | #5 |
Major General
5459
Rep 5,152
Posts |
If you're having error codes then ignore the add-on flap controller for now. Get the OEM flap actuators plugged back in.
If you still have the 180101 error then check your O2 sensor next on your OEM cat downpipes. Maybe twisted/broken/shorted sensor wires causing other faults.
__________________
'18 F80 Base 6MT | '19 F82 Exec DCT | '18 F82 Comp Exec DCT | '23 G80cx
|
Appreciate
0
|
06-05-2020, 02:33 PM | #6 |
First Lieutenant
94
Rep 326
Posts |
Thanks info, today use insta and check al modules.. 0 faults..
Carly bad or insta? Call to germany supliert exhaust valves controller and tell me put in obd2 and the speed controller touch for open close or oem. Thanks |
Appreciate
0
|
06-05-2020, 03:20 PM | #7 |
///M Powered for Life
11480
Rep 10,328
Posts |
i think ISTA would be more reliable than Carly
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|