10-21-2020, 09:10 AM | #1 |
New Member
1
Rep 10
Posts |
265/35/18 and 295/30/18 Cup 2 on track?
Does anyone run 265/35/18 and 295/30/18 Cup 2 on track?
Any major issues with MDM? -1.2% dia on the rear is a lot different to the +2.3% from stock, albeit the Bosch system should be adaptive. This will be for a 9.5/11 stagger on 18" APEX wheels. I need to run Cup 2, and I have limited choices available in 18": 245/35/18 265/35/18 285/30/18 295/30/18 |
10-21-2020, 05:16 PM | #2 |
Private
49
Rep 91
Posts |
I run 265 and 285 on 19" cup2 at track. no issues, it likes this combo. your setup with 35/18 vs. 35/19, they shoudlbe fine. i dont think you need 295 in the back. i have done 255/275, 255/285, 265/285 cup2 or PSS. no issues. these are on stock rims
|
Appreciate
0
|
10-21-2020, 07:09 PM | #3 |
Captain
1019
Rep 859
Posts |
OP is on 9.5/11” so not sure how well sizes above would work - probably a little stretched
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|