Ikon headlight high beam malfunctions

Idontliketrying · 03-04-2022, 05:00 PM

Hey y'all so I swapped my regular adaptive for the ikon with a friend and every time I put on the high beams for more than a few seconds they cut off and I get these three errors. Do y'all think it's the headlight unit itself that needs to be changed or one of the silver modules on the headlight?

Idontliketrying · 03-06-2022, 03:49 PM

Bump

ENDL3SS · 03-07-2022, 12:46 PM

Did you have them coded to the car?

Gatoferoz25 · 03-08-2022, 02:34 PM

U need Codding to get them to work properly

Idontliketrying · 03-08-2022, 02:36 PM

Quote:

Originally Posted by Gatoferoz25

U need Codding to get them to work properly

They are still shows this

Idontliketrying · 03-08-2022, 02:37 PM

Quote:

Originally Posted by Gatoferoz25

U need Codding to get them to work properly

Yup coded by Marius

CYANiDE · 03-09-2022, 12:15 PM

Quote:

Originally Posted by Idontliketrying

Yup coded by Marius

I'd ping Marius, he seems to know a ton about these headlights. Hopefully it's not the full assembly that has to be changed.

Idontliketrying · 03-09-2022, 12:19 PM

Quote:

Originally Posted by CYANiDE

Quote:

Originally Posted by Idontliketrying

Yup coded by Marius

I'd ping Marius, he seems to know a ton about these headlights. Hopefully it's not the full assembly that has to be changed.

He says it's the whole assembly which I gave snitched just wanted to know if anybody else experienced this maybe it's just a module or it's the full thing

Street_insainity · 05-11-2022, 01:25 PM

Quote:

Originally Posted by Idontliketrying

Quote:

Originally Posted by CYANiDE

Quote:

Originally Posted by Idontliketrying

Yup coded by Marius

I'd ping Marius, he seems to know a ton about these headlights. Hopefully it's not the full assembly that has to be changed.

He says it's the whole assembly which I gave snitched just wanted to know if anybody else experienced this maybe it's just a module or it's the full thing

Hey buddy you ever figure out what the issue was? Having this issue but on drivers side..

Idontliketrying · 05-11-2022, 01:27 PM

Quote:

Originally Posted by Street_insainity

Quote:

Originally Posted by Idontliketrying

Quote:

Originally Posted by CYANiDE

Quote:

Originally Posted by Idontliketrying

Yup coded by Marius

I'd ping Marius, he seems to know a ton about these headlights. Hopefully it's not the full assembly that has to be changed.

He says it's the whole assembly which I gave snitched just wanted to know if anybody else experienced this maybe it's just a module or it's the full thing

Hey buddy you ever figure out what the issue was? Having this issue but on drivers side..

Yeah so I got a new headlight transferred over all the modules and it worked. It was an issue with the headlight itself. But when I go to BimmerCode to change the headlight brightness it won't let me. So I think that's a separate issue if Marius can't do it. Haven't asked him yet. But a new light should be the fix.

Street_insainity · 05-11-2022, 01:43 PM

Quote:

Originally Posted by Idontliketrying

Quote:

Originally Posted by Street_insainity

Quote:

Originally Posted by Idontliketrying

Quote:

Originally Posted by CYANiDE

Quote:

Originally Posted by Idontliketrying

Yup coded by Marius

I'd ping Marius, he seems to know a ton about these headlights. Hopefully it's not the full assembly that has to be changed.

He says it's the whole assembly which I gave snitched just wanted to know if anybody else experienced this maybe it's just a module or it's the full thing

Hey buddy you ever figure out what the issue was? Having this issue but on drivers side..

Yeah so I got a new headlight transferred over all the modules and it worked. It was an issue with the headlight itself. But when I go to BimmerCode to change the headlight brightness it won't let me. So I think that's a separate issue if Marius can't do it. Haven't asked him yet. But a new light should be the fix.

Ah I see weird, my car is currently at ACM I'm hoping it's just a module issue but I have the same issue as you do, hoping it gets covered under extended but let's see

Idontliketrying · 05-11-2022, 01:51 PM

Quote:

Originally Posted by Street_insainity

Quote:

Originally Posted by Idontliketrying

Quote:

Originally Posted by Street_insainity

Quote:

Originally Posted by Idontliketrying

Quote:

Originally Posted by CYANiDE

Quote:

Originally Posted by Idontliketrying

Yup coded by Marius

I'd ping Marius, he seems to know a ton about these headlights. Hopefully it's not the full assembly that has to be changed.

He says it's the whole assembly which I gave snitched just wanted to know if anybody else experienced this maybe it's just a module or it's the full thing

Hey buddy you ever figure out what the issue was? Having this issue but on drivers side..

Yeah so I got a new headlight transferred over all the modules and it worked. It was an issue with the headlight itself. But when I go to BimmerCode to change the headlight brightness it won't let me. So I think that's a separate issue if Marius can't do it. Haven't asked him yet. But a new light should be the fix.

Ah I see weird, my car is currently at ACM I'm hoping it's just a module issue but I have the same issue as you do, hoping it gets covered under extended but let's see

If it's all 3 sadly I'll say your light is done for

03-04-2022, 05:00 PM	#1
Idontliketrying BMW Client Advisor 469 Rep 484 Posts Drives: 2023 Bmw M3 CX Join Date: Dec 2020 Location: Florida iTrader: (5) Garage List 2023 Bmw M3 [10.00]	Ikon headlight high beam malfunctions Hey y'all so I swapped my regular adaptive for the ikon with a friend and every time I put on the high beams for more than a few seconds they cut off and I get these three errors. Do y'all think it's the headlight unit itself that needs to be changed or one of the silver modules on the headlight? Attached Images
	Appreciate 0 Tweet Quote

03-06-2022, 03:49 PM	#2
Idontliketrying BMW Client Advisor 469 Rep 484 Posts Drives: 2023 Bmw M3 CX Join Date: Dec 2020 Location: Florida iTrader: (5) Garage List 2023 Bmw M3 [10.00]	Bump
	Appreciate 0 Quote

03-07-2022, 12:46 PM	#3
ENDL3SS Captain 606 Rep 708 Posts Drives: E46/F15/GT4 Join Date: Oct 2013 Location: Dallas, TX iTrader: (11) Garage List 2005 BMW 330i ZHP [0.00] 2015 BMW X5 [0.00] 2018 BMW M3 [0.00]	Did you have them coded to the car?
	Appreciate 0 Quote

03-08-2022, 02:34 PM	#4
Gatoferoz25 BeastM3r 1286 Rep 1,657 Posts Drives: M3 COMP Join Date: Nov 2014 Location: New Jersey iTrader: (10)	U need Codding to get them to work properly __________________ MORR WHEELS - VORSTEINER HOOD - FRONT LIP-CF REAR DIFFUSER - LED HEADLIGHTS - BREMBO BRAKES - Kw SUSPENSION - EISENMMAN - JB4 - SPORT STEERING WHEEL..!
	Appreciate 0 Quote