Favorite uncommon interior mod

[deli333]

[QUOTE=f80tanz;29614298]

Originally Posted by deli333

Hi deli333 , hope you are doing well! Great progress on your build, looks amazing. I had a quick question for you regarding the side blades: I was told these parts are very hard to paint (was going to try to match as best possible to the front dash) due to some kind of wax-type coating. My shop even tried to wrap it, but the wrap wouldn't stick. Any suggestions on how I could address this? I bought an extra OEM set of blades for the front and back doors, so I'd like to experiment to see what might work. Please let me know whenever you get a chance- thanks!

@f80tanz
Hi thank you mate, finally getting there. Interior and engine bay are about to be completed, very few pieces left. Like I have said before they will not match, I tried it before and had the same problem therefore I had to carbon skin them. I know that it looks so nice on dash you want to match but it won't work as far as I know. Couple of other people tried including me. Your best change like I have said before is to go carbon skinning route and switch back to your leather door handles to not to have over carbon.

[f80tanz]

Originally Posted by uncle ben

Not a lot of people running this shifter setup. One of my favorite mods.

What setup is this? Looks good

[uncle ben]

Originally Posted by f80tanz

What setup is this? Looks good

CAE shifter

[deli333]

some sick stuff, i dont know you guys but i loved it

[deli333]

f80tanz
something like above mate, go with carbon for the blades, looks subtle imo. Also you wont need to worry about matching them

[f80tanz]

Originally Posted by deli333

f80tanz
something like above mate, go with carbon for the blades, looks subtle imo. Also you wont need to worry about matching them

That came out really nice, and I like the idea of the carbon blades. Would you be able to tell me where I could get those from?

[deli333]

f80tanz either custom made or a company called nvt autosport. I was going to order from there but found someone local who also does these

[louielouie]

Originally Posted by deli333

some sick stuff, i dont know you guys but i loved it

The weave pattern clashes with the OEM parts though

[deli333]

oem also clashes with itself in some parts for some reason

[deli333]

since these are not common, I thought we better have them in this thread too.


the gloss black buttons make it look complete. I thought it would not do all but the end result is sick.

all the buttons are done by : https://www.instagram.com/carbon_cultureuk/

[Strmtrpr_F80]

Painted door panel inserts and seat inlays, carbon passenger vent, carbon radio cover, carbon light cover, carbon steering column,, 10.25 X5 screen, Black Forest shifter, CS console in carbon, trunk set up for bags with M trunk light. Enjoy

[Sephrr]

Originally Posted by Strmtrpr_F80

Painted door panel inserts and seat inlays, carbon passenger vent, carbon radio cover, carbon light cover, carbon steering column,, 10.25 X5 screen, Black Forest shifter, CS console in carbon, trunk set up for bags with M trunk light. Enjoy

That trunk light is really cool

[Strmtrpr_F80]

Originally Posted by Strmtrpr_F80

Painted door panel inserts and seat inlays, carbon passenger vent, carbon radio cover, carbon light cover, carbon steering column,, 10.25 X5 screen, Black Forest shifter, CS console in carbon, trunk set up for bags with M trunk light. Enjoy

That trunk light is really cool


My installer used the same M puddle light you can buy for your doors

[gerri]

Black gear knob and airbag to match the interior.

[FRZN CS]

Originally Posted by TractionControlDelete

These little silver things that go around the trim of the light switch

What's the process to install these, does the switch assembly need to come out, or just pull off the OEM black trim first... and then try to align the silver trim as best as possible?

[TractionControlDelete]

Originally Posted by FRZN CS

What's the process to install these, does the switch assembly need to come out, or just pull off the OEM black trim first... and then try to align the silver trim as best as possible?

It’s just 3M tape. Stick it on top

[Danlnyc88]

Originally Posted by Strmtrpr_F80

Painted door panel inserts and seat inlays, carbon passenger vent, carbon radio cover, carbon light cover, carbon steering column,, 10.25 X5 screen, Black Forest shifter, CS console in carbon, trunk set up for bags with M trunk light. Enjoy

Info on trunk M light?

[FRZN CS]

Originally Posted by TractionControlDelete

It’s just 3M tape. Stick it on top

Haha! I was WAY overthinking it. Looks great, thanks!

[Sephrr]

Originally Posted by Danlnyc88

Info on trunk M light?

I believe they said it's the same as the puddle lights for the doors

[Strmtrpr_F80]

Does the trunk count. Installed downstar trunk bolts, my triangle back on and my IG plate. I do recommend for a carbon trunk instead of using the plastic clips

[Danlnyc88]

Added Carbonex matching hood handle and LED lights. Along with some Dinmann goodies.

Still debating on whether to use normal floor mats or stick with these cheap China ones...
I modified this by cutting out the area where the foot plate is and using velcro strips to hold it down. Honestly don't think it looks too bad. Wondering what yall think?

[Sephrr]

Danlnyc88 although it's not my cup of tea for the floor mats. It does look like you did a great job with fitting them in there. Are they blueish or is that just from the lighting