| 04-25-2021, 03:51 AM | #1 |
|
Captain
 
553
Rep 815
Posts |
FS: EOS Full billet charge cooler S55
 https://www.eospeed.com/products/evo...nt-intercooler Performance industry experts for the S55 powered M3/M4 asked us to create a better performing air/water intercooler for the F8x M3 and M4 to improve cooling. We have done exactly that. This bar and plate core is USA made and over 75% larger than the OEM cooler. The dual pass water design is much improved from the stock single pass, allowing more heat to be pulled out of the charge air. The Evolution of Speed intercooler core was spec'd by an engineering firm which specializes in heat exchanger design and is rated to 900hp+...far beyond the rating of the factory intercooler. The intercooler picked up 7whp a15wtq on our completely stock 2017 F80 ZCP Used by the worlds quickest and fastest record setting M3's and M4's. When your BMW requires the best in charge air cooling to make the maximum horsepower, look no further. The end tanks are machined from solid pieces of aluminum. Every intercooler we sell will have the fit and finish you expect from an Evolution of Speed product. This intercooler and it's parts are entirely made in the USA. This unit is totally plug-n-play. Inlets and outlet are placed in the same location as the OEM cooler so you can retain your factory charge pipes. The factory expansion tank is retained as well as the bottom factory mounting bracket. Factory hoses attach directly to our adapter fittings. You also get two ports at the front of the intercooler for Meth/Nitrous injection.
__________________
IG @f80_guy
|
| 05-04-2021, 06:16 PM | #7 | ||
|
Major
 
474
Rep 1,009
Posts |
Quote:
__________________
Pure F82
|
||
|
Appreciate
0
|
| 05-04-2021, 08:07 PM | #8 | |
|
Captain
553
Rep 815
Posts |
Quote:
It’s not new |
|
|
Appreciate
1
///BMW Junkie473.50 |
Post Reply |
| Bookmarks |
|
|
