H&R VTF kit inner clearance?

[ruley74]

Hi there,

Curious how many people are running the H&R kit, what the spring rates are like and if it suffers the same clearance issues as the KW V1 which I currently have fitted?

Cheers,

[LOW4LYF]

Originally Posted by ruley74

Hi there,

Curious how many people are running the H&R kit, what the spring rates are like and if it suffers the same clearance issues as the KW V1 which I currently have fitted?

Cheers,

Not yet but in the summer. Gonna pair it with GC Camber plates and get rid of my KW V1.

[ruley74]

Originally Posted by LOW4LYF

Not yet but in the summer. Gonna pair it with GC Camber plates and get rid of my KW V1.

Curious you're reason for wanting to remove the KW also?

[LOW4LYF]

Originally Posted by ruley74

Curious you're reason for wanting to remove the KW also?

Got sold a V1 kit by a Vendor here, even the V2 kit was out already. At that point I didn’t know there are two versions.
I reached out to KW and asked for updated parts, they tried to sell me a brand new V2 kit.
Reason one is clearance, reason two is H&R is the lowest HAS kit on the market.

[ruley74]

bumpy bump, anymore info on the H&R kit clearance and spring rates?

[LOW4LYF]

Originally Posted by ruley74

bumpy bump, anymore info on the H&R kit clearance and spring rates?

If someone can borrow me the V2 perch, I can do side by side pics!

[ruley74]

Originally Posted by LOW4LYF

If someone can borrow me the V2 perch, I can do side by side pics!

would you be able to measure the lower adjustment collar width of the front H&R, i'll measure my V1 KW what i can get the wheel off.

[LOW4LYF]

Yeah... I can do that.

[ruley74]

KW V1 adjustment collar is 100mm.

[LOW4LYF]

Originally Posted by ruley74

KW V1 adjustment collar is 100mm.

Gonna check tonight...

Best

[LOW4LYF]

Originally Posted by ruley74

KW V1 adjustment collar is 100mm.

Same shit....99.50mm

[ruley74]

Originally Posted by LOW4LYF

Same shit....99.50mm

Thanks a lot for measuring them.

That's interesting, I wonder if it sits higher on the shock, that would be the only way it has better clearance.

I think I'm just putting the stock perches back on and Eibach springs.


Cheers,

[NPuter]

I have the H&R VTF kit installed and am planning to adjust the height this weekend. I can provide any measurements/pics if needed.