Coding: Xenon Led Ring

[itrocks4u]

So would having the AEs at 100% brightness with low beams on shorten the life of LEDs or cause other issues?

[Almaretto]

Originally Posted by itrocks4u

So would having the AEs at 100% brightness with low beams on shorten the life of LEDs or cause other issues?

It would depend on if you are changing driving habits.

Angel eyes are at 100% as DRL's.

It gives the vehicle a washed out look at night as well as provides increased glare for others without improving visibility for driver.

[itrocks4u]

Originally Posted by Almaretto

It would depend on if you are changing driving habits.

Angel eyes are at 100% as DRL's.

It gives the vehicle a washed out look at night as well as provides increased glare for others without improving visibility for driver.

Have you done it on yours?

[Almaretto]

Originally Posted by itrocks4u

Have you done it on yours?

And others just to see how it looked, but then changed back.

[hyperspeed]

Almaretto I'll be trying this out tomorrow on an '18 but am I just looking for FLE Module instead of TMS Module?
Do you think the rest will be the same..?

3005 Leuchtmittelmatrix 1, F8
Standlicht Modus 2
change 4th from last value ?

TIA!

[Almaretto]

Originally Posted by hyperspeed

Almaretto I'll be trying this out tomorrow on an '18 but am I just looking for FLE Module instead of TMS Module?
Do you think the rest will be the same..?

3005 Leuchtmittelmatrix 1, F8
Standlicht Modus 2
change 4th from last value ?

TIA!

No. Architecture is different in FLE. Though, general premise still applies (ie comparing DRL to low beam setting).

[chetrickerman]

Does anyone know how to code these lights to act as blinkers as well?

[ApexM4CS]

Originally Posted by ///F80M3

This is how u code halo brightness on our cars.

TMS
3005 Leuchtmittelmatrix 1, F8
Standlicht Modus 2
Change the value circled in red from 2E (46%) to 64 (100%).

There are two TMS modules and each one controls one side of the lights. Make sure you code both TMS modules.

If u want max halo when unlocking car do the same for
Welcome Light 1 (both tms module)

Where is the other TMS module? I'm gonna give this a try. Thanks!

[backagain]

Originally Posted by apex_m4

Where is the other TMS module? I'm gonna give this a try. Thanks!

They are next to each other.

[overlook637]

i'd liked to have my daytime driving lights about as dim as possible. Then code the parking lamp on halos to be 100% bright. bimmercode allowed me to change the parking and low beam halos. Bit bimmercode didn't change anything with DRL brightness.

[ApexM4CS]

Originally Posted by backagain

They are next to each other.

What's the name of the other TMS module? Sorry to sound stupid but I don't get it. Thanks.

[Almaretto]

Originally Posted by overlook637

i'd liked to have my daytime driving lights about as dim as possible. Then code the parking lamp on halos to be 100% bright. bimmercode allowed me to change the parking and low beam halos. Bit bimmercode didn't change anything with DRL brightness.

Same module does it all.

[backagain]

Originally Posted by apex_m4

What's the name of the other TMS module? Sorry to sound stupid but I don't get it. Thanks.

They are called TMS [41] and TMS [42] on my program. See below screen shot.

[ApexM4CS]

Originally Posted by backagain

They are called TMS [41] and TMS [42] on my program. See below screen shot.

Gotcha, thanks for taking the time to snap it!

[david51]

Originally Posted by chetrickerman

Does anyone know how to code these lights to act as blinkers as well?

https://f30.bimmerpost.com/forums/sh...1264291&page=2

[chetrickerman]

Originally Posted by david51

https://f30.bimmerpost.com/forums/sh...1264291&page=2

Thank you!

[Nonopr01]

Has anyone come up with a retrofit for the dummy projector next to the headlights projector?
Would it be possible to retrofit a LED Fog light or something like that?