VRSF Midpipe Review

TrueNorthM5 · 10-06-2018, 12:42 PM

Thanks for posting the videos

Sound is pretty subjective, but I think that sounds good! Definitely a bit deeper. Especially with the crackles in there at the end, it sounds as mean as an M car should sound.

M3PGH · 10-06-2018, 03:30 PM

Quote:

Originally Posted by TrueNorthM3

Thanks for posting the videos

Sound is pretty subjective, but I think that sounds good! Definitely a bit deeper. Especially with the crackles in there at the end, it sounds as mean as an M car should sound.

I agree. Woke the car up in the sound department and doesn't sound so tame anymore. Well worth the money

mike@x-ph.com · 10-09-2018, 07:28 PM

Quote:

Originally Posted by M3PGH

I agree. Woke the car up in the sound department and doesn't sound so tame anymore. Well worth the money

M3PGH · 10-11-2018, 11:25 AM

Here's some pics installed

xelionz · 03-12-2020, 09:12 AM

Any idea if this fits the MPE by just bolting on or modification is required? According to VRSF website they mentioned that no modification is required but there are some forums out there saying that it needs to be cut can anyone verify this?

mike@x-ph.com · 03-12-2020, 10:50 AM

Quote:

Originally Posted by xelionz

Any idea if this fits the MPE by just bolting on or modification is required? According to VRSF website they mentioned that no modification is required but there are some forums out there saying that it needs to be cut can anyone verify this?

If you are installing midpipe on its own without an aftermarket axle-back, you will need to cut the midsection and use the provided clamps to attach it to MPE exhaust

xelionz · 03-12-2020, 11:28 AM

Quote:

Originally Posted by mike@x-ph.com

If you are installing midpipe on its own without an aftermarket axle-back, you will need to cut the midsection and use the provided clamps to attach it to MPE exhaust

Hi Mike, thank you for your feedback. Do you happen to have the installation instructions for the above mentioned?

mike@x-ph.com · 03-12-2020, 11:33 AM

Quote:

Originally Posted by xelionz

Hi Mike, thank you for your feedback. Do you happen to have the installation instructions for the above mentioned?

It does not come with any install guide but its a very simple process. You probably won't need one

Modified_f80 · 03-13-2020, 10:34 PM

so no downpipes? you said it was stock but the pops almost sounds as if it was turned or downpipes

M3PGH · 03-14-2020, 07:25 AM

Quote:

Originally Posted by Modified_f80

so no downpipes? you said it was stock but the pops almost sounds as if it was turned or downpipes

100% stock other than the midpipe. Agreed the pops were definitely loud for stock. Even my M3 CS with AA midpipe and Remus rear doesn't pop as loud as my old comp did.

Redline Fanatix · 12-02-2020, 11:57 AM

Quote:

Originally Posted by M3PGH

Quote:

Originally Posted by Modified_f80

so no downpipes? you said it was stock but the pops almost sounds as if it was turned or downpipes

100% stock other than the midpipe. Agreed the pops were definitely loud for stock. Even my M3 CS with AA midpipe and Remus rear doesn't pop as loud as my old comp did.

Hey that was not the single mid pipe from VRSF correct? I'm torn between the single midpipe from VRSF (same design as AA) or the dual VRSF midpipe.

M3PGH · 12-06-2020, 04:41 PM

Quote:

Originally Posted by Redline Fanatix

Quote:

Originally Posted by M3PGH

Quote:

Originally Posted by Modified_f80

so no downpipes? you said it was stock but the pops almost sounds as if it was turned or downpipes

100% stock other than the midpipe. Agreed the pops were definitely loud for stock. Even my M3 CS with AA midpipe and Remus rear doesn't pop as loud as my old comp did.

Hey that was not the single mid pipe from VRSF correct? I'm torn between the single midpipe from VRSF (same design as AA) or the dual VRSF midpipe.

This was the single midpipe from VRSF

N44RP · 11-04-2022, 11:51 AM

How much louder is the car when just adding the single midpipe keeping everything else stock?

10% under low load and 15% under high load?

10-06-2018, 12:42 PM	#23
TrueNorthM5 Private First Class 118 Rep 137 Posts Drives: 2015 Alpine White BMW M3 (DCT) Join Date: Sep 2018 Location: Winnipeg, Canada iTrader: (0)	Thanks for posting the videos Sound is pretty subjective, but I think that sounds good! Definitely a bit deeper. Especially with the crackles in there at the end, it sounds as mean as an M car should sound.
	Appreciate 0 Quote

10-11-2018, 11:25 AM	#26
M3PGH Major 807 Rep 1,401 Posts Drives: Too Many Join Date: Mar 2009 Location: Pittsburgh,PA iTrader: (1)	Here's some pics installed Attached Images
	Appreciate 0 Quote

03-12-2020, 09:12 AM	#27
xelionz New Member 0 Rep 5 Posts Drives: BMW F80 M3 Join Date: Jan 2020 Location: Singapore iTrader: (0)	Any idea if this fits the MPE by just bolting on or modification is required? According to VRSF website they mentioned that no modification is required but there are some forums out there saying that it needs to be cut can anyone verify this?
	Appreciate 0 Quote

03-13-2020, 10:34 PM	#31
Modified_f80 Second Lieutenant 98 Rep 199 Posts Drives: F80 going G80 2016 Dodge scat Join Date: Jan 2019 Location: Somewhere in NJ iTrader: (0)	so no downpipes? you said it was stock but the pops almost sounds as if it was turned or downpipes __________________ 2018 Metallic grey F80 2016 MB GLE 350 (Wifey) 2016 Dodge Scatpack R/T 2014 Audi S4 2004 Built Subaru WRX with GT35r rotated manifold 50/50 Meth
	Appreciate 0 Quote

11-04-2022, 11:51 AM	#35
N44RP Second Lieutenant 70 Rep 299 Posts Drives: M3 Join Date: Mar 2018 Location: East iTrader: (0)	How much louder is the car when just adding the single midpipe keeping everything else stock? 10% under low load and 15% under high load?
	Appreciate 0 Quote