04-08-2020, 12:29 PM | #1 |
Private First Class
88
Rep 135
Posts |
F80 M3 ZCP max tire size on 666m?
Hi all. I have searched like crazy but can not confirm if I can run the following size on my F80 ZCP 666m wheels
275/30/20 Front and 295/30/20 Rear PS4S Car has stock ZCP suspension. Was hoping this size would improve ride quality a tad by taking a little harshness out of the suspension.
__________________
Current Garage
2018 M3 ZCP - Sakhir Orange 2019 x3 M40 - Glacier Silver 2002 745i - Kalahari Beige |
04-09-2020, 03:23 PM | #3 |
Lieutenant
250
Rep 446
Posts |
On a 10” wide rim, I believe is the minimum width for a 295. Now all 295’s are != in width. Some are narrower and others wider.
Theoretically, an OEM 666M wheel should be OK. I have personally seen the MP4S on a rear 666M rim, and it did not look right. |
Appreciate
1
Mrida33587.50 |
04-10-2020, 04:19 AM | #5 |
Colonel
3234
Rep 2,160
Posts |
On an F80 you "might" have a tiny bit of rub upfront, it's hit or miss.
If it does rub, you just need to put a heat gun and push in the fender liner a tiny bit where it contacts, I mean BARELY touches and all will be good. Like someone already mentioned, MP4S 295 standard spec looks funny on the stock 666M rear. It's a bit too wide and looks a little mushroom, I ran this setup and didn't like the look so I took it off immediately. The traction was awesome though. |
Appreciate
0
|
04-10-2020, 05:48 AM | #6 | |
Private First Class
88
Rep 135
Posts |
Quote:
__________________
Current Garage
2018 M3 ZCP - Sakhir Orange 2019 x3 M40 - Glacier Silver 2002 745i - Kalahari Beige |
|
Appreciate
0
|
04-12-2020, 09:38 AM | #8 |
Private First Class
88
Rep 135
Posts |
I have this thread going on an FB group as well and it seems that with a 10" wide wheel the largest rear would be a 295. If they were 10.5's you would be fine.
__________________
Current Garage
2018 M3 ZCP - Sakhir Orange 2019 x3 M40 - Glacier Silver 2002 745i - Kalahari Beige |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|