06-19-2023, 03:13 PM | #1 |
New Member
26
Rep 28
Posts |
Bootmod3 Wifi Adapter auto-off w/ ignition
Has anyone tried putting an extension between the ODB2 port and a BM3 Wifi Adapter, then rerouting pin 16 in the extension from [BM3WA->ODB2] to [BM3WA->Accessory/ignition +12v?]
This worked great in older ODB2 implementations for things like a COBB AP, not immediately sure if there are any differences power-supply-wise between older ODB2 and the ENET/ODB2 in the F80. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|