275/30R20 PS4S - Rubbing in Front

[spr]

It's an offset thing with a 275 as I don't know they are bigger section width than P4S. I'm ran P4S 275/30/20 on a 9.5 et22 no issue. I just upgraded to 10 et 23 with the same P4S tire. No problemo. It is crazy close to the strut but still no issue. Gotta love HRE.

[Celestion]

I read through the entire post and it is a little unclear if the the OPs situation was generalizable to 19s or not. Is rubbing equally likely to occur with 275/35s on OEM 19s? Lastly, I assume that this would be easily fixed using the hairdryer approach to deepen wheel arch liner. Is this correct?

[Alexander///M]

Will two 265/35/20 work in the front? I have an extremely mild drop and spacers which can be removed if needed.

I need to travel somewhere tomorrow and can’t find anyone with the right size so the above listed is all I can get.

I do plan on purchasing 265/30/20’s when I get the ones I want.

Thanks!

[JamesGames]

Originally Posted by Alexander///M

Will two 265/35/20 work in the front? I have an extremely mild drop and spacers which can be removed if needed.

I need to travel somewhere tomorrow and can’t find anyone with the right size so the above listed is all I can get.

I do plan on purchasing 265/30/20’s when I get the ones I want.

Thanks!

If you're on the OEM wheels I wouldn't run that size. 255/35 245/35 if for TEMP use would be fine, 265/35 might rub and cause more DSC intervention than the two sizes I listed

[Alexander///M]

For the 666M in the front, I went ahead and ordered

275/30/20 since I got a good deal on the

My question is will these sit flush without spacers?

I currently have 265/30/20 with spacers in the front.

Thanks!

[aps]

I just picked up an 18 ZCP F80 with the 666M wheels and P4S tires (265/30) in the front... and I noticed this in the front...

[Nickshawf80]

Originally Posted by einscot

i appreciate that there are still people who are helping work through this with me.

i have the 666 wheels, now have MP HAS Suspension, and all I did was go from 265 MPSS to 275 PS4S - somehow others seem to have this set up without issue, but yet mine rubs once wheel gets close to lock. i don't have spacers or anything like that, and it was rubbing well before the suspension was installed. i took a leap of faith on what i'd read so far that this wasn't going to rub. i asked more than a handful of owners with the same wheels and standard suspension and all said they had no problems.

i guess i'll be going down to 265s in the front to remedy it.

Hey so I have 265/35/19 on ps4s with 12mm spacers on 763m wheels same as 666m wheels just 19 at front I have the same rubbing as you. I wonder does my set up work out similar to yours