RW Carbon 3D-Design Style Rear Diffuser + Supreme Power Exhaust Tips

[jpsimon]

Just installed the RW Carbon 3D Design style rear diffuser and Supreme Power exhaust tips. Thought you guys might be interested in seeing how it looks with stock exhaust tips, and then with the Supreme Power exhaust tips. IMO it 100% needs something other than the stock-sized exhaust tips, they just don't look right with a diffuser like this.


The packaging for the diffuser was great. Here are a couple pics pre-install:











Here are a few pics with the hella dirty stock exhaust tips. They are much too small for a diffuser like this:











And here are pics with the black Supreme Power exhaust tips on. I'm really liking the look of this setup. The quality of this diffuser is really impressive and I'd say fitment is pretty spot on.

[JustAnothaM4]

Looks good! Time for some wheels and suspension to go with the aggressive look.

[jzhu625]

i like them, mind to share how much you paid for the 3D rear lip?

[jpsimon]

Originally Posted by project e46m3

Looks good! Time for some wheels and suspension to go with the aggressive look.

Yeah definitely suspension bits + spacers are needed.

[jpsimon]

Originally Posted by jzhu625

i like them, mind to share how much you paid for the 3D rear lip?

$799.95 before shipping

[LOW4LYF]

Any additional drilling needed?

[jpsimon]

Originally Posted by LOW4LYF

Any additional drilling needed?

There are holes that line up with OEM screws - so you just unscrew those specific ones and then line up the holes and screw them in. And then it comes with a bag of self-tapping screws that you can use to reinforce it in other places. There are holes in the diffuser to use the self-tapping screws with. They all worked fine (as in, they line up with plastic that can be screwed in to) except for 1 that lined up with something metal so I just drilled one hole in the diffuser an inch away from that spot and then the self tapping screw worked.

[LOW4LYF]

Originally Posted by jpsimon

There are holes that line up with OEM screws - so you just unscrew those specific ones and then line up the holes and screw them in. And then it comes with a bag of self-tapping screws that you can use to reinforce it in other places. There are holes in the diffuser to use the self-tapping screws with. They all worked fine (as in, they line up with plastic that can be screwed in to) except for 1 that lined up with something metal so I just drilled one hole in the diffuser an inch away from that spot and then the self tapping screw worked.

But you don't need to use the additional screw's right?

[jpsimon]

Originally Posted by LOW4LYF

But you don't need to use the additional screw's right?

You probably don't NEED to, but I would just to be safe. They provide a ton of extra screws, i didn't use all of them. Just added a few for extra support.

[jPTe92M3]

Originally Posted by jpsimon

You probably don't NEED to, but I would just to be safe. They provide a ton of extra screws, i didn't use all of them. Just added a few for extra support.

Looks great! Just got RW Carbon side skirts and looking to grab that diffuser as well. I've got the same exhaust tips also. Good choices!

[jpsimon]

Originally Posted by jPTe92M3

Looks great! Just got RW Carbon side skirts and looking to grab that diffuser as well. I've got the same exhaust tips also. Good choices!

Did you install those yet? I'll probably end up getting those and the 3d front lip. Have any pics of your sides installed?

[jPTe92M3]

Originally Posted by jpsimon

Did you install those yet? I'll probably end up getting those and the 3d front lip. Have any pics of your sides installed?

Yup, had them installed by RW Carbon since I live 30min away. So with these side skirts you can adjust how far you want them to stick out/in. I had them stick them in just a bit more. Looks cleaner and less risk of passengers, or your self, from stepping on them when stepping out of the car. They'll really go well with that 3D diffuser as it'll tie in the black line around the car.

[jpsimon]

yeah that looks great, definitely going do that

[Brum]

do you know what size the tips are and possibly the original tips were ...Thanks Looks really good

[Mojoman]

I'm running the same diffuser. The exhaust tips look great with it. Nice work!