18x11" test fitment volunteer needed

[apexit]

Guess I'll have to get those 18's then. Crazy that they wont fit, and people complain about these brakes lol

[M3ANOXGREEN]

Originally Posted by Eddy@ApexRaceParts

We'll know enough to publicly announce dates in a week or so.

Thanks Robert and Tim for coming out.

Here's a little teaser while we work on our writeup.

I will wage war against any country of your choosing if that S.O.B is an 19' arc-8 in this picture.

[CanAutM3]

Originally Posted by M3ANOXGREEN

I will wage war against any country of your choosing if that S.O.B is an 19' arc-8 in this picture.

18" EC-7, as is mentioned in the OP.

My understanding is that 18" ARC-8 barrel won't fit over the front 4 pot calipers of the irons. But a 19' wheel would only fit a helluva monster truck .

Originally Posted by Eddy@ApexRaceParts

Yes, this would be the EC-7 design, as we designed that wheel with the best barrel clearance in the 18" size.

[M3ANOXGREEN]

Originally Posted by CanAutM3

18" EC-7, as is mentioned in the OP.

My understanding is that 18" ARC-8 barrel won't fit over the front 4 pot calipers of the irons. But a 19' wheel would only fit a helluva monster truck .

I was told the 19' arc 8 already fit over the steels, i was wondering if they were working on a developmental 19' arc-8 set that has a higher offset and can run a much wider tire. man can dream

[CanAutM3]

Originally Posted by M3ANOXGREEN

I was told the 19' arc 8 already fit over the steels, i was wondering if they were working on a developmental 19' arc-8 set that has a higher offset and can run a much wider tire. man can dream

Need to bug about this. 19' is 19 FEET. You mean 19" for inches. Hence my monster truck reference .

Yes, I know, I am being pedantic

[RSXDC5]

Originally Posted by CanAutM3

Need to bug about this. 19' is 19 FEET. You mean 19" for inches. Hence my monster truck reference .

Yes, I know, I am being pedantic

Shallow and pedantic! - Family Guy

[CanAutM3]

Originally Posted by RSXDC5

Shallow and pedantic! - Family Guy

Pedantic yes.

Shallow no. I did respond to his post and did see the big picture

[M3ANOXGREEN]

Originally Posted by CanAutM3

Need to bug about this. 19' is 19 FEET. You mean 19" for inches. Hence my monster truck reference .

Yes, I know, I am being pedantic

Hahahha I take these things well, that is because I'm edgeamucated.

[kirryccc]

It took so long. Cannot wait to see the article and order a set of 18*10.5.

Originally Posted by Eddy@ApexRaceParts

Will do. I'm trying to find the time to complete the article, as there are a fair number of photos that need editing still. A lot is happening with our engineers and the factory at the same time, so no time is being lost while you guys wait on me

[Account Closed]

lol! They are mounted backwards, huh?

[CanAutM3]

Originally Posted by A. Bedrosian

lol! They are mounted backwards, huh?

Good catch.

But for fitment purpose, it does not really matter .

[Gearhead999s]

After a week of Time Attack,there is no question in my mind that the F8X chassis need a staggered setup to get good laptimes on a road course.All week even with my 10" & 11"s and 275/295 setup we fought oversteer issues mid corner & on exits on power application.This chassis turns in so well compared to the E9X M3's rear grip becomes much more of an issue.I need 18's also for the better selection of proper sized tires.

[FLOSS M]

any updates on the release date? 18x11 ec-7

[Eddy@ApexWheels]

Originally Posted by FLOSS M

any updates on the release date? 18x11 ec-7

We've been working on big things behind the scenes. We'll have our official post up by this time next week. It's done, just waiting on a key detail.

[adc]

Originally Posted by Eddy@ApexRaceParts

We've been working on big things behind the scenes. We'll have our official post up by this time next week. It's done, just waiting on a key detail.

Would you be able to recommend some track tires as well to go with your new fitments? I've had a fairly hard time trying match up a good stagger - say 295/305 or perhaps 285/305. Like I said, any idea or suggestion would be welcome.

[CanAutM3]

Originally Posted by adc

Would you be able to recommend some track tires as well to go with your new fitments? I've had a fairly hard time trying match up a good stagger - say 295/305 or perhaps 285/305. Like I said, any idea or suggestion would be welcome.

I will be going with 275/35R18-305/35R18 Nitto NT01

[dawgdog]

I will be doing the same as CanAutM3. Already have the 305 Nittos on my Porsche in good condition. Will be switching out to Hoosiers on the RS.

[RSXDC5]

Originally Posted by adc

Would you be able to recommend some track tires as well to go with your new fitments? I've had a fairly hard time trying match up a good stagger - say 295/305 or perhaps 285/305. Like I said, any idea or suggestion would be welcome.

This is especially needed for those who have to run 19's w/ CCB's. Trofeo R's and R888's cant be the only good options. Michelin Pilot sport cup 2's are another...

[Eddy@ApexWheels]

I'm finishing up a tire write-up to compliment the 1st tech article. It will list all the recommended tire combinations available for 18" setups. I'm working on the same thing for 19's.

[RSXDC5]

Originally Posted by Eddy@ApexRaceParts

I'm finishing up a tire write-up to compliment the 1st tech article. It will list all the recommended tire combinations available for 18" setups. I'm working on the same thing for 19's.

[chili cheese]

Eddy, I'm assuming the upcoming 18x11 EC-7 will clear the Stoptech Trophy Kit?

Will there be an 18x11 ARC-8 offering that will clear the Stoptech Trophy Kit?

[Eddy@ApexWheels]

Our test fitment results have been posted in this thread http://f80.bimmerpost.com/forums/sho...6#post18719676

Originally Posted by chili cheese

Eddy, I'm assuming the upcoming 18x11 EC-7 will clear the Stoptech Trophy Kit?

Will there be an 18x11 ARC-8 offering that will clear the Stoptech Trophy Kit?

We'll respond to technical questions in our commercial thread soon (which we're creating later today). This volunteer thread needs to die off.