Dyno Results: Bootmod3 Stage 1 F80 DCT

[sfiddy5]

I got my F80 DCT on the dyno yesterday and just wanted to share the results. HP was a little lower than anticipated, however the torque was much higher.

462whp/534wtq. Peak torque at 3600rpms. I knew this thing was a torque monster based on what it feels like, and the numbers confirmed that. I do not have a baseline dyno for when it was stock.

I also noticed it was a little choppy up top, however I did see that on some other graphs on these cars/tunes so I think it may be somewhat normal.

Mods:
Bootmod3 Stage 1 Tune (93 octane)
MPerformance Exhaust
SSR Intakes
SSR Charge Pipes

[1000hp]

Downpipes will probably make the horsepower you were expecting.

[sfiddy5]

Originally Posted by M2_papi

Thanks for sharing. What plugs/gap?

NGK Laser Iridium plugs. Unsure of the gap I’ll need to check.

[sfiddy5]

Originally Posted by 1000hp

Downpipes will probably make the horsepower you were expecting.

Definitely. I was thinking the same thing. I’m happy with it overall. Love the way it drives.

[FrankMstein]

65 deg ambient. Drop-ins in stock air box with carbons removed. BM3 OTS Stage 1 93 octane (Shell) stock everything else. 3rd gear I was told.

[sfiddy5]

Originally Posted by FrankMstein

65 deg ambient. Drop-ins in stock air box with carbons removed. BM3 OTS Stage 1 93 octane (Shell) stock everything else. 3rd gear I was told.

Looks good man! Sure is fun to drive huh!?

[mike@x-ph.com]

Since you do not have baseline numbers, I would not put too much thought into the numbers. Y
our dyno might read lower than what you are seeing online that's all. Power is still the same.