Pin removal tool brake calipers

[erictrainer]

Hey guys need your help big time. Started to do a brake pad change for my track day tomorrow and don't have the pin removal tool, the pin which you hammer to get the pins out. Where could i buy one ASAP or what DIY idea could i use as a replacement. Any help greatly appreciated.

Thanks!

[Continental02]

Are you talking about something like this? It's just a basic pin punch set and works great.

https://www.harborfreight.com/catalo...Cf&q=Pin+Punch

[erictrainer]

Originally Posted by Continental02

Are you talking about something like this? It's just a basic pin punch set and works great.

https://www.harborfreight.com/catalo...38;q=Pin+Punch

Yes sir thank you very much...i was hoping for a home remedy to get it done tonight but will just have to run to the local hardware store tomorrow morning. Thanks!

Originally Posted by Continental02

Are you talking about something like this? It's just a basic pin punch set and works great.

https://www.harborfreight.com/catalo...38;q=Pin+Punch

[WadeM]

I use these: https://www.homedepot.com/p/DEWALT-1...8018/203638542

[mineralsc]

Originally Posted by WadeM

I use these: https://www.homedepot.com/p/DEWALT-1...8018/203638542

+1

[yocubed]

Originally Posted by mineralsc

+1

Not that this is any help to the OP but this is about the only place I could find the actual tool in case anybody else needs one, or wants one to keep around until needed.
https://www.racingbrake.com/product-p/ccp01.htm