Error D90D37

[Makky]

I was going to clear out all errors saved after some coding of my F80, and noticed one error that was not going away.

Didn't check the errors before coding, so I am not 100% it was not there before coding.

Anyone know if this is related to coding at all?

[Makky]

I just tried resetting the FEM_BODY ECU, but the same error is still there.
So I assume this means there is no error on the ECU due to coding.

Next step will be visiting the dealer.

[gemini.m3]

I got this error too.. only noticed it after tuning with bootmod3.. didn't ever pull codes up to that point.

[Makky]

Originally Posted by deceptiv.M3

I got this error too.. only noticed it after tuning with bootmod3.. didn't ever pull codes up to that point.

Did you do anything about it or just ignored it?

[grabbou]

I got same today. I suspect this can be related to low battery conditions (I am 9% now) and I can see the OP having red battery indicator too.

Charging overnight now at the dealership - will let you know if that’s fixing it.

[Makky]

My issue was actually related to the ISTA installation.
I got a newer version, and then the error was not showing up again.

The BMW technician said also that he has seen this error show up when the car has been tampered, eg. tuning.

[Kuucheki]

just got this today. Anyone ever resolve this issue or find out more about it? 2018 M3

[Fat Goose]

I have the same error and it will not clear; incorrect version installed for interior light. Interesting

[Abrunho]

Same error on an F87 M2C (while checking for error codes with BimmerLink)

[Makky]

My error disappeared after re-installing with a newer version of ISTA.

If that is not the case with you, the error could show up when the car has been tampered, eg. tuning.

[Kuucheki]

I agree that it either came up after bootmod3 flashing or bimmercode programming. I really want to download ISTA and update but it seems like a really cumbersome process that could go south really easily.

[Darkie02]

Any one ever fined out more on this did a esys to add Enhanced Bluetoot and cruse control then did some changes in bimmercode but after running back up fault won’t go away.