Adaptive LED lighting turned on-wow

[itrocks4u]

Originally Posted by Almaretto

Negative.

so need to do it old school way?

[Almaretto]

Originally Posted by itrocks4u

so need to do it old school way?

Yes. You have to do it the easy way with E-sys.

[adc]

Originally Posted by Almaretto

Yes. You have to do it the easy way with E-sys.

Paging Almaretto, your inbox is full and I need your help with remote coding.

[Almaretto]

Originally Posted by adc

Paging Almaretto, your inbox is full and I need your help with remote coding.

Deleted 50 messages. You can resend.

[roozybeh]

So I just got my 2020 x3 m package delivered today

I pretty much loaded it with everything. I do see the “decode dazzle” bs as a line item. The car does have the LED adaptive lighting system with all the other options.

Can someone help me and tell me if I can code the E.U. setting for the LED lights? And if yes, can that someone help me to code it?

I find it annoying that I ordered all the options including the adaptive LED specifically to get the no-dazzle option, and then come to find out that it’s disabled because of an ancient law!

Anyways, any help will be appreciated and rightfully compensated. Thanks in advance.

[Almaretto]

Originally Posted by roozybeh

So I just got my 2020 x3 m package delivered today

F97 or G01?

[roozybeh]

Originally Posted by Almaretto

F97 or G01?

G01

[Almaretto]

Originally Posted by roozybeh

G01

Can easily be coded. Do it all the time.

[roozybeh]

Originally Posted by Almaretto

Can easily be coded. Do it all the time.

Just DM you.

[psyki]

Follow-up question here, what are the coding parameters that change the speed at which the adaptive high beams are enabled?

[pmooiweer]

Originally Posted by psyki

Follow-up question here, what are the coding parameters that change the speed at which the adaptive high beams are enabled?

See https://www.bimmerpost.com/forums/sh...php?p=22437451 and the posts right before that one.

[p.o.t.u.s]

Originally Posted by Almaretto

Can easily be coded. Do it all the time.

Can you code a G07?

[Almaretto]

Originally Posted by p.o.t.u.s

Can you code a G07?

In general, yes. For NGHB, still testing.

[p.o.t.u.s]

Originally Posted by Almaretto

In general, yes. For NGHB, still testing.

Awesome. How is progress going on the full euro LED functionality?

[Almaretto]

Originally Posted by p.o.t.u.s

Awesome. How is progress going on the full euro LED functionality?

I am getting close to working formula. I need a few more weeks of testing.

[2kaccordocoupe]

Almaretto
Would you happen have the instructions to enable this on an F98? Thanks!

I-Step: S15A-19-07-553

[Almaretto]

Originally Posted by 2kaccordocoupe

Almaretto
Would you happen have the instructions to enable this on an F98? Thanks!

I-Step: S15A-19-07-553

It is the same coding as a G01, but I do not have instructions on how to do it.

[F83-6MT]

Hello. Way late to this thread but does anyone have an updated recommendation on where to get the updated switch for the F83? I only saw one and it was north of $150 and I thought a lot of people paid far less.

[2kaccordocoupe]

Originally Posted by Almaretto

It is the same coding as a G01, but I do not have instructions on how to do it.

Thanks!

[HyeM3]

I have a question that I was wondering if anyone can help me out with.

In step 3 of the PDF it wasn't showing an "Unknown" option for me under LUT_HBA_CODRV_VERT to select so I just left it as it was and changed the Werte values myself. The PDF says to you select any value and after you change the Werte it would revert to "Unknown". But for me after I changed the Werte it stayed the same and didnt revert to "Unknown". Should I change the VO value to something else or is it fine since I have the correct Werte value?

Thanks in advance!

[Almaretto]

Originally Posted by HyeM3

I have a question that I was wondering if anyone can help me out with.

In step 3 of the PDF it wasn't showing an "Unknown" option for me under LUT_HBA_CODRV_VERT to select so I just left it as it was and changed the Werte values myself. The PDF says to you select any value and after you change the Werte it would revert to "Unknown". But for me after I changed the Werte it stayed the same and didnt revert to "Unknown". Should I change the VO value to something else or is it fine since I have the correct Werte value?

Thanks in advance!

Car does not care about drop-down menu. You change one or the other; however, ultimately, all that matters are werte values.

If there is no corresponding option for configured value, then it displays as "Unknown."

[HyeM3]

Originally Posted by Almaretto

Car does not care about drop-down menu. You change one or the other; however, ultimately, all that matters are werte values.

If there is no corresponding option for configured value, then it displays as "Unknown."

Yeah I figured as long as the Were value was correct it should be good. Just thought it was weird that the drop down value didn't automatically change to unknown. Thanks for the help!