Carbon Ceramic Brake Thread

[SYT_Shadow]

Originally Posted by jaylazy2020

I have the oem 400mm front and 380 rear 2NH set up with gold calipers

They look great but despite converting to braided lines and SRF fluid the pedal still feels spongy.

Only thing I can think of is to get another standard bleed done and the the iSTA abs module bleed done.

Just wanted to ask you if you have any advice?

There may not be anything wrong with your brakes.

The ISTA bleed is a great option just to be sure, followed by a regular bleed.

[FrankMstein]

Originally Posted by SYT_Shadow

There may not be anything wrong with your brakes.

The ISTA bleed is a great option just to be sure, followed by a regular bleed.

I had to do ISTA + bleed 2x.

[jaylazy2020]

Originally Posted by FrankMstein

I had to do ISTA + bleed 2x.

Is that the ISTA bleed first and then standard bleed twice?

[FrankMstein]

Originally Posted by jaylazy2020

Is that the ISTA bleed first and then standard bleed twice?

Yes, I had to do a subsequent bleed while at the track a few weeks later the last time I flushed. I got air in both front.