What did you do to your M3/M4 today?

[Wanted_M]

Originally Posted by M 4 FUN

New wheels for this season.

Like a boss, sick wheels

[UZIVRT]

New tires mounted along with 15mm spacers all around. Coming along nicely at one month of ownership

[therealkenc]

Originally Posted by UZIVRT

New tires mounted along with 15mm spacers all around. Coming along nicely at one month of ownership

I'm clearly biased but the way the rear quarter profile looks like from the front 3/4 perspective just gets better everytime I look at it. And I used to be an E92 guy haha.

Enjoy your modding journey 😎

[HotRodM4]

Originally Posted by Mintsopoulos

Retro roundel installed

Where'd you buy the roundels from?

[Mintsopoulos]

Originally Posted by HotRodM4

Where'd you buy the roundels from?

Here's the part number:

51-14-8-087-194

First link on Google is where I purchased from.

[Mintsopoulos]

Originally Posted by Wanted_M

My good friend Carlos (knightarmor) hooked it up and sent me this bad azz Z bar made of Chromoly as I didn't want to install a full roll cage. Way better than that cheesy BAF bar I bought last year as their mounting points are flimsy.

Damn that's a quality piece! I'd Rep one ;p

[Keebs_yo]

Installed the Turner Motorsport aluminum skid plate. The 2lbs. it adds is worth the peace of mind knowing the oil cooler is better protected. Plus gave me a reason to clean out all the crap that has collected in there.

[IB M]

Originally Posted by Keebs_yo

Installed the Turner Motorsport aluminum skid plate. The 2lbs. it adds is worth the peace of mind knowing the oil cooler is better protected. Plus gave me a reason to clean out all the crap that has collected in there.

Nice Mod for sure.

How miles to get all that treasure built up in there? Makes me want to drop mine asap.

Also wonder why Turner doesn't add a metal mesh covering over those four large air flow holes to block small heavy items like rocks from bouncing up.

[Keebs_yo]

Originally Posted by IB M

Nice Mod for sure.

How miles to get all that treasure built up in there? Makes me want to drop mine asap.

Also wonder why Turner doesn't add a metal mesh covering over those four large air flow holes to block small heavy items like rocks from bouncing up.

That’s about 3 years and 30,000 miles. As far as some kind of mesh, not sure. I guess they were keeping with the stock design.

[ShopVac]

Originally Posted by Keebs_yo

Installed the Turner Motorsport aluminum skid plate. The 2lbs. it adds is worth the peace of mind knowing the oil cooler is better protected. Plus gave me a reason to clean out all the crap that has collected in there.

After bending my oil cooler going through the in-field. Felt this was a must have (along with a new Mishimoto oil cooler of course). Feel much better knowing this is under there...

[2SNAILS]

Time for sum fresh new👟's

[Keebs_yo]

Originally Posted by 2SNAILS

Time for sum fresh new👟's

Hard flex and tease lol! Congrats!

[hellokitty]

Originally Posted by wknd_M

Installed my m performance electronic steering with the G80/82 paddles thanks for the recommendation Wtfitzvi

Do the G8X paddles fit like OEM or is modification needed to make them fit?

[therealkenc]

Originally Posted by hellokitty

Do the G8X paddles fit like OEM or is modification needed to make them fit?

They fit like OEM, and feel very sturdy. No regrets.

[fabje]

Installed CTS Water-Air Intercooler and OEM Carbon Flaps + Splitter

[M3nmotion18]

Originally Posted by Wanted_M

My good friend Carlos (knightarmor) hooked it up and sent me this bad azz Z bar made of Chromoly as I didn't want to install a full roll cage. Way better than that cheesy BAF bar I bought last year as their mounting points are flimsy.

Hi,

I also installed this at Carlos & MP Exhaust Big Thanks to Knightarmor!!

[F80RN]

Well today, I hit a trash can that flew off an unsecured load on the freeway. I guess that counts?

[wknd_M]

Originally Posted by hellokitty

Do the G8X paddles fit like OEM or is modification needed to make them fit?

No mod whatsoever, direct plug & play

[Keebs_yo]

Originally Posted by F80RN

Well today, I hit a trash can that flew off an unsecured load on the freeway. I guess that counts?

Ouch

[ENDL3SS]

Track prep. New OEM spark plugs and Dinan ignition coils.

[JustAnothaM4]

Organized the garage and got more 👟's for the GTS! 😈

[darrvao777]

Originally Posted by darrvao777

I know for most people this is a 30 second install but for a dumdum like me, this was a bold install 😂

installed the bms clutch stop

can't say it's life changing but it does feel a lot better (i have a 2015 f82 so i don't know if there's additional clutch pedal travel in earlier years)

special thanks to topjimmy for his super useful install guide 🙂: https://f80.bimmerpost.com/forums/sh...38;postcount=4

well this is disappointing, opened the door this morning and saw pieces of the bms clutch stop on the floor mat

back to stock for me

i find the florida heat kills all adhesive…