BMS Delivering an S55 Blowoff Valve Kit

Jbonly21 · 04-21-2021, 01:15 PM

Quote:

Originally Posted by garrettjusmc

Quote:

Originally Posted by TexasF80

Quote:

Originally Posted by Jbonly21

Did anyone receive this yet?

I was told shipping this week. Fingers crossed.

I just got a tracking number for mine.

That's good to know, that they have actually started shipping them out.

McBobby Jr · 04-22-2021, 03:05 AM

Any benefit to running this BOV on stock turbos, even when on a max effort E85 tune?

garrettjusmc · 04-23-2021, 11:34 AM

Quote:

Originally Posted by McBobby Jr

Any benefit to running this BOV on stock turbos, even when on a max effort E85 tune?

I really am not sure personally. I'm doing it purely for some audible fun.

McBobby Jr · 04-23-2021, 12:45 PM

Quote:

Originally Posted by garrettjusmc

I really am not sure personally. I'm doing it purely for some audible fun.

The BOV sound is great, when you install yours definitely try and see if you can upload a video on here of how it sounds. The video BMS posted didn't really capture the blow off noise to well.

garrettjusmc · 04-23-2021, 03:10 PM

Quote:

Originally Posted by McBobby Jr

Quote:

Originally Posted by garrettjusmc

I really am not sure personally. I'm doing it purely for some audible fun.

The BOV sound is great, when you install yours definitely try and see if you can upload a video on here of how it sounds. The video BMS posted didn't really capture the blow off noise to well.

I will most certainly. It won't be for a little while most likely due to work and kiddos sports but I will get to it in May most likely. Pic for fun.

todd20 · 04-23-2021, 06:07 PM

Im also waiting for mine but since I'm in CA it will have to ship to x-ph first then ship to me. Even though I literally 30 mils away from BMS in Simi Valley. BS California rules.

I'll try to post a video if no has it by then

Jbonly21 · 04-23-2021, 06:44 PM

Quote:

Originally Posted by todd20

Im also waiting for mine but since I'm in CA it will have to ship to x-ph first then ship to me. Even though I literally 30 mils away from BMS in Simi Valley. BS California rules.

I'll try to post a video if no has it by then

I was told it's only pre orders right now, they haven't started shipping them out yet. Has anyone actually received them ?

garrettjusmc · 04-24-2021, 03:18 PM

Quote:

Originally Posted by Jbonly21

I was told it's only pre orders right now, they haven't started shipping them out yet. Has anyone actually received them ?

mine is one of the pre-orders. I will have it according to tracking next week. Maybe post a small video of the box opening.

todd20 · 04-30-2021, 06:07 PM

I have it now but have no idea on how to set this up lol

TexasF80 · 04-30-2021, 06:36 PM

Quote:

Originally Posted by todd20

I have it now but have no idea on how to set this up lol

Quote:

Originally Posted by todd20

I have it now but have no idea on how to set this up lol

No instructions for the electronic part of the kit? Any pics?

todd20 · 04-30-2021, 06:49 PM

Quote:

Originally Posted by TexasF80

No instructions for the electronic part of the kit? Any pics?

Nothing just parts

TexasF80 · 04-30-2021, 09:52 PM

Quote:

Originally Posted by todd20

Quote:

Originally Posted by TexasF80

No instructions for the electronic part of the kit? Any pics?

Nothing just parts

I just emailed a contact I have there. I will reach out to Payam from Burger tomorrow.

The wiring looks pretty easy, pos/neg and the white must go to the throttle body. I don't see any hose those for vacuum 🤷

todd20 · 05-01-2021, 01:37 AM

Quote:

Originally Posted by TexasF80

I just emailed a contact I have there. I will reach out to Payam from Burger tomorrow.

The wiring looks pretty easy, pos/neg and the white must go to the throttle body. I don't see any hose those for vacuum 🤷*♂️

I also emailed BMS. Let me know if you hear something I'm clueless here lol

TexasF80 · 05-01-2021, 09:15 AM

Quote:

Originally Posted by todd20

Quote:

Originally Posted by TexasF80

I just emailed a contact I have there. I will reach out to Payam from Burger tomorrow.

The wiring looks pretty easy, pos/neg and the white must go to the throttle body. I don't see any hose those for vacuum 🤷*♂️

I also emailed BMS. Let me know if you hear something I'm clueless here lol

Cool, will do. I'll ping them on FB as well. Would like to be ready when ever they decide to ship...

TexasF80 · 05-03-2021, 04:57 PM

Here is what I got back

Install the J pipe as usual.
Use one of the supplied methanol plugs to plug one of the 1/8NPT ports. ***Do not use the one supplied in the Turbosmart box, that only works for the BOV which will not be used***
Install one of the push lock fittings to the other methanol port on the J pipe, and another onto the Turbosmart BOV.
Install the other two push lock fittings onto the mac solenoid as shown in the picture.
Attach the red power wire into the fuse box like shown.
Attach the black ground wire to aluminum brace.
Third and last white wire will go through a grommet hole and down to the pedal.
This will connect via positap to the white wire on the pedal which is position #4 on the pedal.

TexasF80 · 05-03-2021, 05:00 PM

Pics

todd20 · 05-03-2021, 05:12 PM

Quote:

Originally Posted by TexasF80

Pics

Just got it too!

Thank you for the post

Will try to get it done today if not tomorrow

todd20 · 05-03-2021, 05:39 PM

I guess this one is only if your using meth and goes in the other hole in the j pipe

Jbonly21 · 05-03-2021, 06:41 PM

Quote:

Originally Posted by TexasF80

Pics

Nice, can't wait.

todd20 · 05-03-2021, 11:08 PM

Finally put it on took me over two hours because I couldn't find the hole to connect the white wire to the acc pedal but once I finished I was kind of disappointed. It not really anything too crazy barley louder then my intakes honestly. It only works when you press the gas 100% at around 3k+ rpm. It doesn't work just by revving the engine. Anyways here is the video

McBobby Jr · 05-03-2021, 11:17 PM

Quote:

Originally Posted by todd20

Finally put it on took me over two hours because I couldn't find the hole to connect the white wire to the acc pedal but once I finished I was kind of disappointed. It not really anything too crazy barley louder then my intakes honestly. It only works when you press the gas 100% at around 3k+ rpm. It doesn't work just by revving the engine. Anyways here is the video

Well, that is unfortunate. I would've thought I'd be hearing blow off noises like BOV Equipped N54's. Nevertheless, sounds cool.

MisterF80M3 · 05-04-2021, 12:05 AM

Quote:

Originally Posted by todd20

Finally put it on took me over two hours because I couldn't find the hole to connect the white wire to the acc pedal but once I finished I was kind of disappointed. It not really anything too crazy barley louder then my intakes honestly. It only works when you press the gas 100% at around 3k+ rpm. It doesn't work just by revving the engine. Anyways here is the video

That sounds horrible with those burbles..

04-22-2021, 03:05 AM	#46
McBobby Jr Lieutenant 211 Rep 576 Posts Drives: '18 240i xDrive Join Date: Mar 2020 Location: Anchorage, AK iTrader: (0)	Any benefit to running this BOV on stock turbos, even when on a max effort E85 tune? __________________ current '18 F22 240i xDrive - FBO '16 F82 M4 ZCP - FBO previous '08 E90 335i Montego Blue
	Appreciate 0 Quote

04-23-2021, 06:07 PM	#50
todd20 First Lieutenant 140 Rep 335 Posts Drives: 2016 m4 Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	Im also waiting for mine but since I'm in CA it will have to ship to x-ph first then ship to me. Even though I literally 30 mils away from BMS in Simi Valley. BS California rules. I'll try to post a video if no has it by then
	Appreciate 0 Quote

04-30-2021, 06:07 PM	#53
todd20 First Lieutenant 140 Rep 335 Posts Drives: 2016 m4 Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	I have it now but have no idea on how to set this up lol
	Appreciate 1 TexasF8096.50 Quote

05-03-2021, 04:57 PM	#59
TexasF80 Legend 97 Rep 166 Posts Drives: M3, RR, S2k, X1, JK Join Date: Oct 2019 Location: Prosper, TX iTrader: (2)	Here is what I got back Install the J pipe as usual. Use one of the supplied methanol plugs to plug one of the 1/8NPT ports. *Do not use the one supplied in the Turbosmart box, that only works for the BOV which will not be used* Install one of the push lock fittings to the other methanol port on the J pipe, and another onto the Turbosmart BOV. Install the other two push lock fittings onto the mac solenoid as shown in the picture. Attach the red power wire into the fuse box like shown. Attach the black ground wire to aluminum brace. Third and last white wire will go through a grommet hole and down to the pedal. This will connect via positap to the white wire on the pedal which is position #4 on the pedal. __________________ Insta: @TexasF80 \| YouTube:lvnvevo Supported by: Limitless Car Care \| Braum Racing \| Opt7 \| MRR Wheels
	Appreciate 0 Quote

05-03-2021, 05:00 PM	#60
TexasF80 Legend 97 Rep 166 Posts Drives: M3, RR, S2k, X1, JK Join Date: Oct 2019 Location: Prosper, TX iTrader: (2)	Pics Attached Images __________________ Insta: @TexasF80 \| YouTube:lvnvevo Supported by: Limitless Car Care \| Braum Racing \| Opt7 \| MRR Wheels
	Appreciate 1 guess2098516.00 Quote

05-03-2021, 05:39 PM	#62
todd20 First Lieutenant 140 Rep 335 Posts Drives: 2016 m4 Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	I guess this one is only if your using meth and goes in the other hole in the j pipe Attached Images
	Appreciate 0 Quote

05-03-2021, 11:08 PM	#64
todd20 First Lieutenant 140 Rep 335 Posts Drives: 2016 m4 Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	Video Finally put it on took me over two hours because I couldn't find the hole to connect the white wire to the acc pedal but once I finished I was kind of disappointed. It not really anything too crazy barley louder then my intakes honestly. It only works when you press the gas 100% at around 3k+ rpm. It doesn't work just by revving the engine. Anyways here is the video
	Appreciate 1 TopJimmy5457.00 Quote