|
Post Reply |
|
Thread Tools | Search this Thread |
02-03-2018, 02:06 PM | #45 |
BimmerPost Supporting Vendor
1253
Rep 859
Posts |
Was able to get them out today. Definitely a PITA prying the sway bar out of the way. Thanks for the tip!
__________________
Speed & Tech Motoring
23585 Overland Drive, Unit 178 Sterling, VA 20166 (Headquarters) 23541 Pebble Run Place, Unit 140 Sterling, VA 20166 (Satellite shop) |
Appreciate
0
|
02-03-2018, 02:35 PM | #46 |
Second Lieutenant
47
Rep 209
Posts |
|
Appreciate
0
|
02-15-2018, 10:27 PM | #49 | |
Captain
231
Rep 656
Posts |
Quote:
Got these installed.
__________________
///M4 | AKRA Evo & DP's | Brembo GT BBK | MSR CAI & CP's | MPSC2 |
Suspension : | KW CS 3-way | Dinan Toe Links | GC ARWJ & End links | IND Shims | SPL Control arms & End links | aFe Bars | |
|
Appreciate
0
|
02-15-2018, 10:46 PM | #50 |
BimmerPost Supporting Vendor
1253
Rep 859
Posts |
Finished my rear suspension upgrades. I went with Fall Line spherical bearings for the upper arms and Fall Line adjustable links (non-race) for the lower arms. It was the most cost effective solution for me.
__________________
Speed & Tech Motoring
23585 Overland Drive, Unit 178 Sterling, VA 20166 (Headquarters) 23541 Pebble Run Place, Unit 140 Sterling, VA 20166 (Satellite shop) |
Appreciate
0
|
06-21-2019, 10:19 PM | #51 |
First Lieutenant
214
Rep 385
Posts |
|
Appreciate
0
|
06-22-2019, 03:46 PM | #52 |
Lieutenant
210
Rep 400
Posts |
Connects at the bottom of the front hub on one end and the front of the subframe on the other end. The length of this arm mostly impacts caster.
|
Appreciate
0
|
06-22-2019, 06:45 PM | #53 |
First Lieutenant
214
Rep 385
Posts |
Thanks, so that is a replacement for the control arm/thrust arm that houses the rubber bushing? So you either replace the rubber bushing with Dinan or Fall Line monoball or replace the whole arm with this SPL piece?
|
Appreciate
0
|
06-22-2019, 10:13 PM | #54 |
Lieutenant
210
Rep 400
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|