Oil Catch Can Setup Single Turbo?

[Schemxr]

i currently have a Vargas oil catch can that i used with my twin turbo setup and it works great. However, i’m going single turbo now and i’m a little confused as to where im supposed to leave the second hose coming out of the catch can since I don’t have any intakes now like I did with the twins.

Do i leave the hose coming out of the catch can to atmosphere or do i clamp that hose off?

[b_w.]

What kit are you going with? I am going to install a turner catch can and route it into the intake with a orb compression fitting pre turbo.

I see a lot on guys just vent it to atmosphere off the valve cover.

[Schemxr]

Originally Posted by b_w.

What kit are you going with? I am going to install a turner catch can and route it into the intake with a orb compression fitting pre turbo.

I see a lot on guys just vent it to atmosphere off the valve cover.

big boost g35-1050 kit
i ordered a full kit from jpworkz, he took 1.5 months to mail garbage so i ordered another one from big boost. the jpworkz kit was supposed to come with 17 total items, he gave me 3. good thing i paid with amex

[DeezBluBallz]

I'm curious as well. As I currently have the Mishi catch can, and am doing the Vargas Single. I need to figure this last part out before I drop it off at the shop end of the month.

[b_w.]

Originally Posted by DeezBluBallz

I'm curious as well. As I currently have the Mishi catch can, and am doing the Vargas Single. I need to figure this last part out before I drop it off at the shop end of the month.

I didnt realize vargas made a single kit. Curious to see the end product.

[DeezBluBallz]

Originally Posted by b_w.

I didnt realize vargas made a single kit. Curious to see the end product.

https://vargasturbo.com/product/vtt-...gle-turbo-kit/

[Schemxr]

Originally Posted by b_w.

I didnt realize vargas made a single kit. Curious to see the end product.

they just released a kit, it’s very nice. uses factory wastegate to control boost, welds all look nice as well. they have a video of a dyno pull on their f82 on their vargas instagram

[pxscu]

Originally Posted by DeezBluBallz

I'm curious as well. As I currently have the Mishi catch can, and am doing the Vargas Single. I need to figure this last part out before I drop it off at the shop end of the month.

I have mishi as well, venting to atmosphere

[Schemxr]

Originally Posted by pxscu

I have mishi as well, venting to atmosphere

do you have a breather filter at the other end or just open hose?

[pxscu]

Originally Posted by Schemxr

do you have a breather filter at the other end or just open hose?

Open hose but I’d like to add a breather soon

[Schemxr]

Originally Posted by pxscu

Open hose but I’d like to add a breather soon

does oil come out without the breather? thank you btw

[pxscu]

Originally Posted by Schemxr

does oil come out without the breather? thank you btw

I have to wipe down the frame rail occasionally, no worries